Jump to content
SAU Community

Apexi Power Intake Kits And Replacement Pods For Gtr

Beer Baron
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

Hi guys,

When I heard Apexi were going under I panicked and ordered some Apexi power intake kits. I wanted some spare pods for my GTRs which run them.

I bought 4 of the universal kits. These come with 2 gaskets so if you are using them as new filters for your GTR kit you have both the pod-adapter gasket and the adapter-AFM gasket. But you can also use them on GTST, GTT etc as they can bolt straight to the AFM. The kit also comes with 4 new bolts. it doesn't come with the bracket to secure the pod though.

I'm keeping 2 as spares for me, and selling 2 as I don't need that many spares! I'm asking $80 each filter. Pick-up from me in sydney, or post wherever (at your cost).

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

i dunno. I mean they are supposed to be replaceable, but you can probably clean them once or twice first. maybe once every couple of year? of course if they are visibly deteriorated then change them.

Sol32 Community Regular

Sol32

Posted
Posted

Hmmm...

The most I can say about mine is the buildup of dirt in the crevices of the filters. If I can assertain (spl) whether these should be changed, I'll grab the pair off ya.

Andrew

Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

best to give them a good clean and see how they come up. take them off, and flush through with warm water (pour it inside, so the flow is going inside of filter to outside of filter). you don't want to be throwing away filters for nothing if they are still good.

  • 2 weeks later...
Beer Baron Grand Master

Beer Baron

Posted
  • Author
Posted

no worries james. just send me a pm and we can meet up, or I can bring it to some SAU gathering.

lingeringsoul Grand Master

lingeringsoul

Posted
Posted

i'll probably heading up to chatswood this weekend anyway, i'll let you know later in the week.

just to make sure I haven't gone blind, the post did say it fits gtst afm right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...