Jump to content
SAU Community

Recommended Posts

Heya gang.

As some of you might have seen I had a fair few issues with my brand new computer and I just wanted to say they are all sorted now, yay!

I am finally running the pc all 100% now, so I thought I'd test out the graphics so I install my old copy of F.E.A.R.

I then maxed out every performance/graphics/physics/lighting setting in the game, then ran that little 'test my settings' to see if it is optimum or not for your pc (you know the one that runs that in game sequence).

WELL... It looks friggin fantastic, I had no idea how much I was missing out on when I was running it on my old computer, and I thought the game looked good then!

Anyway, long story short these are the stats it came up with in that end dialogue box:

Minimum Frames Per Second: 67

Average Frames Per Second: 111

Maximum Frames Per Second: 255

% Under 25 FPS: 0%

% Between 25-40 FPS: 0%

% OVer 40 FPS: 100%

So needless to say I am a very, very happy camper!

If anyone else could run that same thing from FEAR on their system and post their scores along with their comp specs, I'd love to compare my bits with yours... ehehe.

-Me

Link to comment
https://www.sau.com.au/forums/topic/167997-how-fast-is-your-pc/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Mind if i ask what your specs are?

Im about to get my new rig so i will be able to see what i should expect.

Intel 2 Core Duo E6600 2.4GHZ 1066FSB

GIGABYTE S775, GA-965P-DS3P V3.3

4GB Corsair Ram: DDR2 PC-6400

Gainwind Pre OC 640mb DDR3 8800GTS PCI-E

2x 250G SATA2 Seagate Barracuda's 3G/s 16mb 7200.10 (I was going to Raid with a 10,000 WD for the system files, but meh)

720Watt power supply

2x Asus DVD-Burner's

An Asus silent knight for the CPU

A few case fans, a coolermaster case and a leadtek DVB-T and capture card

Oh and a 22" Widescreen Chimei monitor, 5ms, and a creative 5.1 surround speaker system

& Vista Premium.

With my case & cpu cooler I also have the scope to safetly overclock my cpu out to around 3~3.2GHZ as well as increase the FSB speed, and also overclock the graphics card a little more using something like AtiTool as well as increase my ram timings.

But at the moment, it just doesn't need any of that.

I've run:

F.E.A.R

Doom3

Quake4 &

Halflife 2

All with everything maxed out and not once have any of those games even shown a flicker of a slower framerate, or have any issues at producing anything on screen.

I'm very happy.

Intel 2 Core Duo E6600 2.4GHZ 1066FSB

GIGABYTE S775, GA-965P-DS3P V3.3

4GB Corsair Ram: DDR2 PC-6400

Gainwind Pre OC 640mb DDR3 8800GTS PCI-E

2x 250G SATA2 Seagate Barracuda's 3G/s 16mb 7200.10 (I was going to Raid with a 10,000 WD for the system files, but meh)

720Watt power supply

2x Asus DVD-Burner's

Case: Stacker 830 Evo Black (for hotness)

Power Supply: Thermaltake toughpower 750w

CPU: AMD 6000+ Duel Core

Motherboard: Gigabyte GA-M59SLI-S4

RAM: 4gb kit cosair 800mhz DDR2 XMS2 low latency

Hard Drive: 75gb Raptor 10,000RPM

Hard Drive: 500gb Samsung

DVD/CD: Pioneer 212D SATA

Video Card: (unsure which brand i will be getting) 8800GTX 768mb

Sound Card: Creative X-Fi Xtreme Audio

OS: windows Ultimate

Monitor: Samsung 22" WS 5ms

So i should be looking at about the same performance as what your getting which will be good!

Case: Stacker 830 Evo Black (for hotness)

Power Supply: Thermaltake toughpower 750w

CPU: AMD 6000+ Duel Core

Motherboard: Gigabyte GA-M59SLI-S4

RAM: 4gb kit cosair 800mhz DDR2 XMS2 low latency

Hard Drive: 75gb Raptor 10,000RPM

Hard Drive: 500gb Samsung

DVD/CD: Pioneer 212D SATA

Video Card: (unsure which brand i will be getting) 8800GTX 768mb

Sound Card: Creative X-Fi Xtreme Audio

OS: windows Ultimate

Monitor: Samsung 22" WS 5ms

So i should be looking at about the same performance as what your getting which will be good!

You'll be looking at higher performance than mine with that video card... But I spose for most applications it would be a moot point, as both of our systems will be running that well that you couldn't tell the difference.

We both have the same ram though.

Are you just going to use the raptor for your system files?

You looking at overclocking your cpu at all?

Are you just going to use the raptor for your system files?

You looking at overclocking your cpu at all?

Yeah the raptor will just be used for system files.

Unsure about overclocking, but all the hardware is there to support it thats for sure! Just that ive never done it... So now would be the time.

so how much did these puppies cost you if you dont mind me asking?

Mine set me back just over $3k

Edited by MADGT4
Yeah the raptor will just be used for system files.

Unsure about overclocking, but all the hardware is there to support it thats for sure! Just that ive never done it... So now would be the time.

Mine set me back just over $3k

Its never been easier to overclock than it is now!

Check out the new atomic, I think they've got a decent overclocking guide in there this month.

Mine cost about $3.2K.

That's including a 22" widescreen lcd, and 5.1 surround system.

I already had my own copy of vista and wireless keyboard/mouse and ups etc.

how much without all the extras, just the hardware. Seriously need to upgrade :laugh:

I hate this thread!!! go away =[ i need to make some serious upgrade changes on mine also.

Insu i remember talking about your computer and the case problem etc, but without the goodies outside the box, roughly how much did it cost as Baconer asked.

Btw i have run World of Warcraft Med-High settings at 164fps if that counts as something.

Mine cost about $3.2K.

That's including a 22" widescreen lcd, and 5.1 surround system.

I already had my own copy of vista and wireless keyboard/mouse and ups etc.

Yeah i've got all that stuff ready to go.... My mate has his own small comp business so i get a wee bit-o discount. :D

Its never been easier to overclock than it is now!

Check out the new atomic, I think they've got a decent overclocking guide in there this month.

Will do!

Intel 2 Core Duo E6600 2.4GHZ 1066FSB - $310

GIGABYTE S775, GA-965P-DS3P V3.3 - $205

4GB Corsair Ram: DDR2 PC-6400 - $650

Gainwind Pre OC 640mb DDR3 8800GTS PCI-E - $600

2x 250G SATA2 Seagate Barracuda's 3G/s 16mb 7200.10 (I was going to Raid with a 10,000 WD for the system files, but meh) - $236

720Watt power supply - $145

2x Asus DVD-Burner's - $104

Coolmaster case - $98

Total not inlcuding GST: $2,348

Total including GST: $2582

Obviously you add more for an aftermarket cpu cooler, which in my case I went for an Asus silent knight, plus the DVB card.

I should also make a note that you could probably get gear cheaper than this which would work at the same level perfectly well if you are keeping it stock, but with the cpu, cooler, ram and motherboard I chose, I specifically looked for overclocking friendly gear. Also the video card can take a bit more using something like ATITool, or so I hear.

On another note, for anyone looking to build their own system AusPc market have a decent price for a package which includes:

1x intel E6600 2.4ghz Duo Core Cpu

1x Gigabyte P965 motherboard

1x 2Gig corsair XSM2-6400 DDR2 Ram

For $797.50 inc GST.

http://www.auspcmarket.com.au/index.php?re..._info.php?input[product_code]=CP-E6600DS3COMBO&input[category_id]=

Add a decent graphics card (8800GTS, don't even consider the ghey 85 and 8600 cards out now... check out any reviews and specs and you'll see why),

a case, PSU, DVD drive & HDD and you could have a decent barebones system for under $2k I rekon (without os obviously).

And before anyone asks. No I did not by my system, nor any gear from AusPc.

hmmm my computer is super old now.

i got the first SLi motorboard out with the nforce4 chipset and a socket 939 athlon. Now the socket is obsolete, so if i want to upgrade, it's new CPU, motherboard, RAM as a minimum! unless i can find an old socket 939 athlon but it's not really worth the money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...