Jump to content
SAU Community

Recommended Posts

You fool... he said VSPEC diff... :laugh:

its LSD oil...

Castrol LSX90 will do.. i changed mine today

Dont give advice if you arent sure

hahaha good one mate. do you have any idea what your on about or how a v-spec lsd works? go lean some things thanks.

i spose you would put a lsd oil in a helical diff to you noob

let me start..

first off. a lsd oil is a lsd oil because of the friction modifiers to prevent "chatter" in the clutches and give smooth takeup

. v-spec diffs have zero preload. and no chatter problems.

also they are controlled by a ecu and require a constant rate of friction to work corectly. putting a friction modified oil in is not what is recomended. you can but it wont work as the engineers intended. just like sticking a lsd oil in you gearbox. have fun selecting lol

you put a lsd oil in a viscose diff?? no. why? cos theres no exposed friction plates. threre a sealed unit. dont recomend oils to people ok :laugh:

how does the ecu control the diff? i have never heard of this and am very curious. is there a site which can help me out i am very very interested

Edited by turboedsloth
its a v-spec.

(hydrolicly controlled) its controlled by the atessa ecu im pretty sure. unless theres a seperate a-lsd ecu

There is a seperate ALSD ECU as the GTSTs dont have an atessa ecu... and on the actual diff it has stamped USE LSD OIL ONLY

I dont pull this info out of my arse mate.. i actually have a GTR Vpsec Active LSD

Now im willing to accept that perhaps a non LSD oil can be used.. but if nissan saw fit to stamp in metal on the actual Diff LSD OIL ONLY.. then who am i to argue

Edited by MotoMan

fair enough. for a minuite there i thought you were. if thats what the sticker says cool.

just like the standard r33gtr we imported that had "viscouse lsd" sticker on it when clearly its a standard 2 way. :D

you can use lsd oil in non lsd or viscouse for "heavy duty aplications" acording to most oil companys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...