Jump to content
SAU Community

Recommended Posts

I'm planning on importing a jzx90 mark 2 sometime in the future, around December with a budget of around 10 grand to get it registered and on the road.

Been looking on jspec as well as prestige motor sports, yahoo.co.jp auctions as well as various other sites to try and get an idea of the price.

Finding just the cost of the vehicle is quite easy, and thanks to the high value of the Aussie dollar, easy to convert too :laugh:. But it's all the other costs involved in the importing process that are doing my head in. I've done a bit of research and come up with a rough idea of some of the costs invovled

Vehicle Cost ~300,000 yen

Service Fee 1,100.00

Dealer Stock Fees 1,600.00

Shipping 2,000.00

Shipping Insurance 350.00

Compliance 2,500.00

Tyres 1,000.00

Registration 550.00

Stamp Duty Depends on cars value

Now I think I've covered most things, but then I jump on J-spec and check out this add http://www.j-spec.com.au/list/index.php?ID=9383 which lists the FOB price of the car at 295,000 yen but the Landed and complied cost at $9500. So obviously I'm overestimating some of the costs invovled in the importing process.

So just what does the FOB price include? Is it vehicle price only or vehicle price + dealer stock fees or... ?

I might be getting a bit ahead of myself here but I'd also like to know if it's worth paying the extra to put the car in a container rather than the RORO method. I've read a few threads and people are saying they have been getting damaged cars using the latter method and things stolen by the wharfies, at least with the container you know the car will arrive in an unmolested state.

And finally (probably should have asked this first) Is it possible to get a jzx90 mark 2 manual on the road and registered in aus for 10 grand, or am i being overly optimistic?

Edited by Intensevil
Link to comment
https://www.sau.com.au/forums/topic/169138-costs-invovled-for-jzx90-mark-2/
Share on other sites

Not worth the container unless your bringing in an exotic car or some rare spec modified car. Aslong as you dont ship with KIWI roro should be fine. Insurance.... goodluck! Theres a thread somewhere on here took the guy nearly a year to claim through insurance.

Edited by vietorious

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...