Jump to content
SAU Community

Recommended Posts

hey guys. heres the story

i have a series 1.5 White r33 m spec. already have the shopping list stickers on the front of the doors as u can see in the photos. but im planning on slamming my car on its ass, painting the boot and the bonnet black. and removing the rear wing.

I want to organise a huge door length sticker from the begining of the door near the other stickers right up to the end of the car or anything close to that. maybe something like a apexi decal or even a performance sticker as i am planning on engine work. but if i was to go out and buy a sticker. where can i find them? is there a website and does anyone have any ideas. prefferably red white grey and black mixed colours in the sticker is what im looking for, but anything goes as long as it looks good. heres a pic of my car as it is. and i will update pics as i spray the boot and bonnet. and remove the wing and atm its getting the coilovers adjusted. cheers would really like some help

heres some chaddy pics i made up on paint. shit effort but heres the idea :)

i think an ignition sticker sideways along the car would look good but is it hard to get my hands on one?? any other ideas would be welcome cheers

post-29018-1179456358_thumb.jpg

post-29018-1179456379_thumb.jpg

post-29018-1179456539_thumb.jpg

hey guys. heres the story

i have a series 1.5 White r33 m spec. already have the shopping list stickers on the front of the doors as u can see in the photos. but im planning on slamming my car on its ass, painting the boot and the bonnet black. and removing the rear wing.

I want to organise a huge door length sticker from the begining of the door near the other stickers right up to the end of the car or anything close to that. maybe something like a apexi decal or even a performance sticker as i am planning on engine work. but if i was to go out and buy a sticker. where can i find them? is there a website and does anyone have any ideas. prefferably red white grey and black mixed colours in the sticker is what im looking for, but anything goes as long as it looks good. heres a pic of my car as it is. and i will update pics as i spray the boot and bonnet. and remove the wing and atm its getting the coilovers adjusted. cheers would really like some help

heres some chaddy pics i made up on paint. shit effort but heres the idea :)

i think an ignition sticker sideways along the car would look good but is it hard to get my hands on one?? any other ideas would be welcome cheers

dear god...

*just be good, try to help*

autobahn, repco, motoquip...

theres also a few people on here that make them...

i hope you got those stickers when you had something installed...

i hope you actually have something installed...

dude... please.

the car came with the stickers. and i asked the poor bloke i bought it off the same question. he said to me "dude... please"

every sticker has something installed on it. except for the veilside sticker. but the gives me no means to take it off..

the cars not a 10 second weapon but as it is i know its very quick for what it is. otherwise i wouldnt be advertising more stickers..

oh yeah. and how about these plates... [PFT-S14] or [PFT-S15] or [PFT-200] u can tel i got something against em :)

dude... please.

the car came with the stickers. and i asked the poor bloke i bought it off the same question. he said to me "dude... please"

every sticker has something installed on it. except for the veilside sticker. but the gives me no means to take it off..

the cars not a 10 second weapon but as it is i know its very quick for what it is. otherwise i wouldnt be advertising more stickers..

oh yeah. and how about these plates... [PFT-S14] or [PFT-S15] or [PFT-200] u can tel i got something against em >_<

thats fine, as long as its not a stocker :wave:

i would go pft 200 cause it will cost less...

Dr Doof where are your manners!! >_< You should be helping a Hornsbyite get some business here!!

Hey mate PM Taran on here, he makes these kind of graphics for a living and should be able to help you out.

Edited by Zilch*

Mate I like the mean jap look you're talking about, hence why my car is dropped and failry stock looking with driftek rims. I'm not too crazy about putting a big decal on a car though, I like the shopping list on the doors but if I was too ever put a graphic design on the car itself I would probably pay a fortune to have it airbrushed. Still if you like the look if it then that's what matters in the end, don't be bullied by peoples opinions of your car. Here's a pic to help you decide

post-35130-1179471827_thumb.jpg

Good luck with it and give Taran a Pm, he can point you in the right direction.

hey zilch. uve seen my car b4. i dont know if u remember. but about october last year we exchanged high beams and thumbs up on pittwater rd. u remember?? by looking at ur car im pretty sure it was u >_<

as for the sticker on the side. i get what ur saying. a huge sticker on the side will either make the car look 10 times better or 10 times worse. hopefully a nice sized apexi sticker with the emblem is what i might be lookin at. thats AFTER i crack a late 12 sec pass hopefully :wave: (with a pfc ofcourse :wave: no high hoper here)

hey zilch. uve seen my car b4. i dont know if u remember. but about october last year we exchanged high beams and thumbs up on pittwater rd. u remember?? by looking at ur car im pretty sure it was u :)

as for the sticker on the side. i get what ur saying. a huge sticker on the side will either make the car look 10 times better or 10 times worse. hopefully a nice sized apexi sticker with the emblem is what i might be lookin at. thats AFTER i crack a late 12 sec pass hopefully ;) (with a pfc ofcourse :) no high hoper here)

personally, i like the shopping list in small size down the side, it looks nice :)

and yeah, give Taran a PM, he'll help you out :)

and zilch... :) i had no idea he was local :) (as in rami, not Taran)

When doing car graphics vinyls are the best, airbrushing might be the ultimate but when you want to be able to change the graphics and see what it looks like with spending up big time, you can't beat vinyl....

Why don't you see if I can come up with a custom vinyl design that you would like.

And I can alway incorporate a tuner logo into a design.

black bonnet looks good on the cars with a nice set of dishies but ive gotta say shopping lists along with other decals have got to be the ultimate wank mod. i mean if u want to be fully sik bro then by all means go for it but god theres gotta be better ways to spend ur money. if u must get one of those greddy stickers and have it going diagonal down the side of ur car *shudders*

thanks boys... dont be shy for comments whether it would look good or not or any ideas... im just chasing that mean jap look (black bonnet black boot white deep dish wheels :)

cheers

for a mean jap look, you don't slam the car on its ass, that's australian/american, japs have it lowered to a sensible height.

Carbon fibre bonnets look jap and painted OEM look ghetto american.

Fix up that front bar, chopped front bar are lebbo style (i apologise if that term is incorrect)not jap style, they buy yourself a nice front diffuser.

For a true jap look, get a nice looking gt wing or if you are going wingless, go for the drift wing rather than leaving a gap where the orginal wing is suppsoed to be.

This is just my interpretation of a True Jap Look.

funny enough. the guy i bought the car off wasnt leb, he mustve cut the front bar out. personally yes i wouldnt of done it, and i am trying to find a front bar atm. but im not phsyked about it, and for slamming the car, i wont be ridicoulous enough to have my exhaust scraping like in most cases :rofl:, and for stickers yes they can look like wanker- mobiles but if u get the right combination happeining they can look awesome, whatever u guys think dont think im gna go for the stripey tribal look or anything, im looking for a more performance side sticker, cheers guys will keep u updated with pics

ive so far lowered the rear end... and kept the front a touch high... so the wheels dont rub against the guards when i turn.. it sits beautiful not to low and still looks mean, we have removed the rear wing but havnt painted the boot or bonnet black yet.. so far without any huge sticker it looks very good as it is.... trying to get photos organised to prove how good this can really look. we have also put a dummy sticker on the side just to see if it does work out.. 1/2 the workshop said noooo dont dont blah blah and the other half said go for it... although this sticker isnt what im after (just a logo of the performance shop im at BTA MOTORSPORT) it does look great and everyone in the workshop did agree it does look alot meaner than b4.. the sticker was big enough to cover most of the door and abit behind the door too... if i can organise some pics just to show u guys what im after.... trust me im one person who wont want my car looking like 1 of those plastic fantastic looking excels with dirty fake looking ugly stickers.... they gotta work with the car and if they dont then there not going on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...