Jump to content
SAU Community

Recommended Posts

head light height adjustment on a series 2? really ? if so thats one more gadget I can play with when the car finally gets here.

\

I'm guessing that yours is a late (post-August) 1998 model, so it's a series 2, right? In that case, the 3-stage switch is probably for your headlight height adjustment.

Not sure about the other things, maybe post some pictures and see what the consensus is?

yep 3 stagea switch is for the headlights up n down. next to mine i have a little flashing LED for my blackwidow immobilizer not sure what your switch is for, but just bout every series 2 ive seen has something different there so good luck....

They are xenon from standard but compliance workshops remove them during their process, and replace them with a dodgey gay wiring setup and lights that blow every 3 weeks, lucky i dont do much night time driving and my dads mate owns a workshop i just drop in a take some globes when i need them.

saw a set of the original xenon resistor units, wiring and globes start at a dollar on ebay and finish for over $850 so they ain't cheap.

Question for everyone else; are compliance shops allowed to take these in my opinion if youve bought the car you own everything in it and they can't take it. how do i go about footing them up the arse and taking them back? ill just have to go flog $850 worth of intercooler n bits from their workshop

They are xenon from standard but compliance workshops remove them during their process, and replace them with a dodgey gay wiring setup and lights that blow every 3 weeks, lucky i dont do much night time driving and my dads mate owns a workshop i just drop in a take some globes when i need them.

saw a set of the original xenon resistor units, wiring and globes start at a dollar on ebay and finish for over $850 so they ain't cheap.

Question for everyone else; are compliance shops allowed to take these in my opinion if youve bought the car you own everything in it and they can't take it. how do i go about footing them up the arse and taking them back? ill just have to go flog $850 worth of intercooler n bits from their workshop

yeh this was talked about recently, not sure what forum but the conclusion was everything that car came with is yours.....i believe your well within your rights to ask for them.......not sure if i'm correct tho

I was alerted by someone else on these forums stating they didnt get their xenon lights back, so I made sure I rang and asked about it. Before I even got 1/2 way thru the sentence he assured me they bag everything they change and ship it over with the car.

depending on how straightforward the swap over is I may or may not swap back to the xenon lights!

They are xenon from standard but compliance workshops remove them during their process, and replace them with a dodgey gay wiring setup and lights that blow every 3 weeks, lucky i dont do much night time driving and my dads mate owns a workshop i just drop in a take some globes when i need them.

hmm that doesn't sound right either - yes they will replace them with a halogen setup (like most other cars on the road except maybe new bmw's and lexus's?).

But i've had my headlights in for 12 months and only replaced them voluntarily to do a road trip interstate cos I thought my "original" ones weren't that bright. Turns out there was probably nothing wrong with them so there you go.

Definitely shouldn't need to replace them every 3 weeks (not sure if you were exaggerating but even twice a year is way too often!!).

While we're talking headlights, I did notice when I replaced mine that my right side headlight doesn't sit in properly. Normally the clip will hold it tight so it cant move - well thats how my left side one is, but the right side one can wobble about a mm or half a mm up and down. Not enough to make a difference and it definitely wont fall out or anything but I guess it does mean its a bit of a dodgy setup...

I wonder if the compliance workshops all use a similar setup or not??

I was alerted by someone else on these forums stating they didnt get their xenon lights back, so I made sure I rang and asked about it. Before I even got 1/2 way thru the sentence he assured me they bag everything they change and ship it over with the car.

depending on how straightforward the swap over is I may or may not swap back to the xenon lights!

if the compliance shop does the usual butcher job on the zennons you will never get them to work again as they hack out the wiring .pm me for more info nudge nudge wink wink say no more

it was bit of an over exageration ive replaced them 3 times in 12 months but that is too much in my books, ive done a bit bettter job insulating the plugs and crap they put on and havent blown since. The wiring for headlights looks hella dodgey in my car.

it was bit of an over exageration ive replaced them 3 times in 12 months but that is too much in my books, ive done a bit bettter job insulating the plugs and crap they put on and havent blown since. The wiring for headlights looks hella dodgey in my car.

So definitely no go with putting Xenons back on? I just don't see the logic behind taking them off for compliance... I thought Xenons ARE a good thing, especially if they are adjustable (glare).

dont know how the system works but does the headlight height adjustment work with non Xenon lights.

Tried adjusting mine with the the three way switch on the right of the steering column and it didnt do squat. Im gonna have to also check the wiring on the right headlight set up cause I noticed that it flicked off & on a few times. Bodgy brothers strikes again.

Dont want to hijack this forum but just wanted to say, sunday night had a early model Impreza wagon & late model Audi S4 try it on. Chewed up & spatt out. Ha...............no mods, just a sweet launch

Tried adjusting mine with the the three way switch on the right of the steering column and it didnt do squat. Im gonna have to also check the wiring on the right headlight set up cause I noticed that it flicked off & on a few times. Bodgy brothers strikes again.

Dont want to hijack this forum but just wanted to say, sunday night had a early model Impreza wagon & late model Audi S4 try it on. Chewed up & spatt out. Ha...............no mods, just a sweet launch

holy shitttt that volvo gets into it...........f+*#ck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...