Jump to content
SAU Community

Recommended Posts

For sale: 1995 Nissan Skyline GTS-T

Location: Sydney's North

Asking Price: $13,499 as is or $12,999 without Oil Cooler and Fog Lights

Killometer's: 132,***

Manual or Automatic transmission: 5 spd Manual

Engine Type: RB25DET

Condition: Full respray end of 2006, 0 rust, 0 dents.

Rego until end of October!

Details:

The car was Complied back in 2000, I have owned it since New Years Day '06.

Modifications (That I can think of):

Series 2 Engine (not the original) with:

- Front Mount Intercooler kit,

- K & N podfilter,

- Splitfire Coil Packs,

- GFB Boost controller,

- Blitz blowoff valve,

- Dump pipe,

- Super High-Flow Cat,

- 3" Inch exhaust,

- Cold Air Induction,

- HKS ECU,

- Xtreme Performance cushioned Button Clutch

- High-flow turbo

- Oil Cooler

Suspension/Handling:

- Tanabe 'circuit' coilovers,

- Aftermarket caster rods,

- HICAS lock bar, HICAS system supplied too.

- Tein tie rods with Tie rod spacers (extra steering wheel lock)

- Front Strut Brace with Master Cyclinder Stopper

- Custom Made Braided Brake Lines

- Standard Brakes with Ferodo DS2500 Pads, and air ducting

Body: Bodykit is functional, cold air intake draws from the vent under the number plate. Kit was fitted with the intention of fitting brake ducting to the car and as such it has the necessary holes on the sideskirts to allow for cold air ducting onto the brakes at the rear. Ducting at the front fitted!

- Full car respray in factory silver,

- Trust front bar,

- 400R side skirts,

- Explosive rear bar,

- Nismo clear side indicators, standard supplied too

- GTR rear wing,

- Tinted windows,

- 17" Work Equip Rims (Super Light Weight), running 235/45s Semi Slicks at front, and 255/40s Pirelli Euphorias at rear.

- Hella Foglights

In Car:

- Moulded Gauge Holder above centre console - housing Boost, Oil Pressure, Oil Temp,

- Kenwood head unit (CD / MP3 / Radio),

- Nismo Gear Knob, standard supplied too.

- Nardi Gear Boot

- Aftermarket steering wheel fitted, standard, with air bag, supplied too

- Auto Turbo Timer

- Tracking System

Car has all power options, ABS etc, Loads of spare parts to go with the car too. Engine is in great condition, serviced regularly, runs 9 psi. Car had new water pump fitted and timing belt done at 110,000Kms. Car would make great base for a reliable circuit racer / drift car. Car has run a 1:15 around Wakefield in the wet on the current setup (rear wheels spun the whole way). Car has huge $$$ invested in parts.

Loads of spare parts to go with the car too: Including

- Spare set of rear Coil - over suspension. (Peddars springs over Koni yellow shocks)

- Dash pieces and centre console,

- Some Air Con Pieces,

- Spare Front Mount Intercooler - same size as the one on the car

- Spare side indicators,

- Air Bag Steering Wheel,

- Factory Rear Wiper,

- Coil Pack cover,

- Factory Tie Rods,

- HICAS system,

- Wiper Motor,

- Factory Gear Knob

And more!

Will sell for $12,999 without Fog Lights and Oil Cooler!

Price: $13,499 as is!

Make me a genuine offer if your interested, all offers will be considered (worst I can say is no).

Photos:

2271130.jpg

p6230085il7.jpg

p6230088go2.jpg

p6230087vx9.jpg

p6230107cp4.jpg

p6240114cu2.jpg

2468517.jpg

Contact: Matt on 0422 99 22 19, post here or PM me!

Edited by JDSracing
Link to comment
https://www.sau.com.au/forums/topic/169665-syd-1995-r33-gts-t-m-spec-modified/
Share on other sites

  • 1 month later...

There will be another demo of what the car can do at Eastern Creek on the 4th August.

If it is sold by then the price will include the track day, I will be happy to come out with the new owner and give some feedback / instruction on where the limits of the car are and what it can do.

Make me a genuine offer if your interested, all offers will be considered.

Price Drop

Will sell the car for $16,000 as is (it needs a new brake caliper quoted at $185 from Just Jap, and the interior is stripped out (but included in the sale))

or $17,000 if I put everything back together (get a new caliper, and put the interior back together).

trust me mate, I want to sell it working, I'm just struggling to be able to get around without a licence at the moment.

But fingers crossed, I will have the caliper and be able to fix it on Saturday, then it can be test driven.

  • 3 weeks later...

Considering swap offers at the moment.

I wouldn't mind swapping for a hachi (+ cash my way) if it had the right mods.

A cage would help things along nicely...

Price is very negotiable if your a serious buyer / looking to swap

Still for sale,

Loads of spare parts to go with the too: Including

Spare set of rear Coil - over suspension. (Peddars springs over Koni yellow shocks)

Dash pieces and centre console,

Some Air Con Pieces,

Spare Front Mount Intercooler - same size as the one on the car

Spare side indicators,

Air Bag Steering Wheel,

Factory Rear Wiper,

Coil Pack cover,

Factory Tie Rods,

HICAS system,

Wiper Motor,

And more!

Will sell for 14,000 without Fog Lights and Oil Cooler!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...