Jump to content
SAU Community

Recommended Posts

I've been reading as much as i can on the forums about suspension, SK's kit and Tein HA's.

I've noticed a lot of complaints about the Tein HA's - in particular the harshness of ride. I don't really understand how harsh the ride is as i'm running stock suspension now, but would it be like go-kart stiff? or would it be able to be compared to anything else?

Also, would it be any good for putting down 200rwkw? I've read a couple of stories with ppl having trouble putting power down with these coilovers although some seem to love them.

I've read about SK's setup too, and it seems like a pretty good setup (user reviews) although i may be able to get the HA's for half the price.

My question would be, should i spend the extra money and get SK's R32 gts-t setup? or go for the HA's?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/
Share on other sites

hey mate i've got Tein HR's and HA's.....in both my skylines well the HA has a 16 stage soft to stiff levels soo liek if u think its hell stiff turn the knob and make it soft but my tein HR their only height adjustables so they are real stiff so every little pebbles feel liek a pot hole but the HA's are ok well i danno about putting power down but i know that my Teins are awsome in the Handling wise i mean taking corners there is like prolly 0 body roll but on aussie roads it can be a bit like harsh the ride but normal roads that don't have pot holes etc will be good :stupid: hehe it is a little bumpy but waht coil overs arnt?

Cheers

Chi

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143798
Share on other sites

I had HA's, and yes they were Go-Kart harsh!

One had the little knob thing broken off, so i couldnt adjust the damping ratio.

They were also super low, ive got a feeling they were for a GTR (is that right?!?), because when i tried to wind down the spring to raise the car, the car didnt go any higher. It was super low = no travel = very very bumpy. I had the steering wheel to hold onto, but my passengers didnt enjoy it. Hills drives were dangerous, car would bounce around corners....

But maybe my HA's were setup wrong.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143889
Share on other sites

hey mate i've got Tein HR's and HA's.....in both my skylines well the HA has a 16 stage soft to stiff levels soo liek if u think its hell stiff turn the knob and make it soft but my tein HR their only height adjustables so they are real stiff so every little pebbles feel liek a pot hole but the HA's are ok well i danno about putting power down but i know that my Teins are awsome in the Handling wise i mean taking corners there is like prolly 0 body roll but on aussie roads it can be a bit like harsh the ride but normal roads that don't have pot holes etc will be good :stupid: hehe it is a little bumpy but waht coil overs arnt?

Cheers

Chi

The harshness is mainly because of the high spring rates found in the HA. If you don't want a harsh ride, I recommend the Tein Superstreets if you are after coilovers. They are more street friendly as spring rates are closer to factory. I've proven to a lot of ppl with the mentality "all coilovers are harsh" that the Tein SS are surprisingly comfortable!

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3143950
Share on other sites

coilovers traditionally have very stiff rides - great for responsiveness but not so good for australian roads. have seen a WRX with coilovers hit corrugations on a tarred road (the surface was just uneven.. kinda shit) and since it was around a corner the car just skipped straight over them like a rock on a pond and ploughed into a ditch.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3145163
Share on other sites

ive got em too and in my opinion if you can get em new for half price then get em. mine were used and knocks a bit b/c the pillow balls are worn. also my front 2 damper knobs are missing so i cant adjust them but they seem fine. yep they are damn stiff, i got sore neck the first week after 10mins driving. once you get used to them theyre great but big bumps and holes are unforgiving. makes you read the road conditions alot more. i love em but i havent been in a car with SK's setup to compare which is something thats holding me back from getting them.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3145222
Share on other sites

also my front 2 damper knobs are missing so i cant adjust them

I wonder if this is a common problem, with the adjustment knobs breaking off - one of mine was broken too. Might be something to be careful with - if you own HA's, be careful not to turn the knob with too much force.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3146882
Share on other sites

I've got HA's on my 33 GTR and yes they are too hard because of the spring rates, but cornering and precision in handling are awesome. Once the tyres are up to temp I can easily get more G's in cornering than I can in acceleration, and thats a huge buzz. I love it!

Still, i'm changing to bilstein shocks and softer springs soon as the car is my daily driver as well and the roads in cairns are way too bumpy.

I've got easily 110mm of ride height and there is room to adjust higher if I want too.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3148646
Share on other sites

I've got the HAs and don't find them too hard for normal street use. Mine have the progressive spring feature tho (i.e. small spring for riding everyday bumps, big fu(k off spring for cornering etc).

I have the rears set 4 clicks from squishy, and the fronts 4 clicks from house stumps. They make cornering a dream :P

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3149776
Share on other sites

The helper springs cant do anything for softening a ride, they bind (crush and become solid) with the weight of the car on them so the spring rate is only given by the main spring. They are only there to keep the main spring trapped at full droop.

The Tein HAs and HRs are pretty old now aren't they? I'd be wary of buying 2nd hand ones. Either way, I would just get the Whiteline/Bilstein groupbuy, for the amount of handling AND comfort you get, it's pretty hard to beat.

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3161424
Share on other sites

I put a set of HA's in my mates mitsubishi vr4 and he loves them, reckons they were the best 700 bucks he ever spent.

But as stated sometime coi over can be a little harsh on the road, i had g4's in my r31 and loved them but reall stiff springs so occasionally i'd second guess driving it. Now i got JIC's in me cefiro and there not to bad just get to know your route to work and home a little better

Link to comment
https://www.sau.com.au/forums/topic/170171-tein-has/#findComment-3162871
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...