Jump to content
SAU Community

Recommended Posts

Hi Guys

I have this two option turbo for my 34GTT Manual. What would you reckon to be a good street / highway bashing turbo for an internal stock engine. The reason why is because my next engine i wish to fit is an R32 or R33 GTR. The Garrett was formally on a 32GTR engine with a proper plate fitted to the cast iron manifold as a single turbosetup (i do not need to pay anything for this turbo..it's a gift). I will be running HKS FCon Vpro ECU and i was told the change from 25DET to 26DETT wuold be minimal while still retaining the GTT ECU for A/Con & other electrical components. The 2835 will come with a HKS dump pipe together.

Current mods:

Greddy Oil Cooler

Blitz Downpipe

HKS Drager Exhaust system

Blitz Twin Core Radiator

HKS FMIC

HKS EVC 6

Turbo install will be together with Upgraded Sard Fuel pump (running simultaneously with the original) and Nismo Fuel Regulators. I don't have sufficient cash for the Fcon Vpro ECU, so im wondering is it possible to run on low boost around .8 to 1 bar boost for the time being. Though i will do a standard dyno run to check the A/F after install.

Need advice from the "Pro's"......help

Edited by driftmeister
Link to comment
https://www.sau.com.au/forums/topic/170434-hks-2835pro-vs-garrett-t04e-ar60/
Share on other sites

Hi Guys

I have this two option turbo for my 34GTT Manual. What would you reckon to be a good street / highway bashing turbo for an internal stock engine. The reason why is because my next engine i wish to fit is an R32 or R33 GTR. The Garrett was formally on a 32GTR engine with a proper plate fitted to the cast iron manifold as a single turbosetup (i do not need to pay anything for this turbo..it's a gift). I will be running HKS FCon Vpro ECU and i was told the change from 25DET to 26DETT wuold be minimal while still retaining the GTT ECU for A/Con & other electrical components. The 2835 will come with a HKS dump pipe together.

Current mods:

Greddy Oil Cooler

Blitz Downpipe

HKS Drager Exhaust system

Blitz Twin Core Radiator

HKS FMIC

HKS EVC 6

Turbo install will be together with Upgraded Sard Fuel pump (running simultaneously with the original) and Nismo Fuel Regulators. I don't have sufficient cash for the Fcon Vpro ECU, so im wondering is it possible to run on low boost around .8 to 1 bar boost for the time being. Though i will do a standard dyno run to check the A/F after install.

Need advice from the "Pro's"......help

i dont get this post .....

then let me ask u why would u buy a 2835 pro s if your putting in a rb26dett in the r34 gtt...?

thats just sounds senseless if u wanted a gtr go buy one the other way too look at it is money versus power if i spent the same amount of money on a stock gtt then the engine swap to a rb26dett i bet you ill have more balls in the gtt with a rb25det..

Sorry Guys for the confusion.

I am planning these turbo upgrade until i have enough cash (1 year from now) to buy the RB26 engine. Thats the reason why im not modding any internal parts for the RB25. I can still sell the 2835 later if that is the best turbo for my current setup & needs. I have sat in a car with T04E+ RB26, it really comes on boost really fast and progresive, so can still use this turbo again once i fed up with the stock twins.

Why RB26? Well they have more grunt and mod options parts availability, so it's best to spend money on the internal of the RB26 than the RB25.

I need advice on which turbo gives more oomph on the street & highway blast for RB25.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...