Jump to content
SAU Community

Recommended Posts

injectors $375 or will swap for a good rb25 turbo

afm $80 bought from add for$120 but didnt end up being the prob with my car

plenum $250 need cash bought it in a group buy have gone rb26 set up now

microtech lt-8 forget what type of motor it came off comes with full loom $450

Edited by OGR88 R32
injectors $375 or will swap for a good rb25 turbo

afm $80 bought from add for$120 but didnt end up being the prob with my car

plenum $250 need cash bought it in a group buy have gone rb26 set up now

hey buddy, what is needed to run these injectors on my rb20?? are they all working fine??

if so i have am rb25 turbo that i am about to put up for sale..... just took it off my car. in excellent condition, NO shaft play and blows no smoke. inspection welcome in melb if you like.

where are you located? if the injectors are able to be put into rb20 easy enough and in good nick then i am keen to trade so let me know if ya interested!! pm or call me on 0422 034 450

Ryan

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...