Jump to content
SAU Community

Recommended Posts

Hi, ive got a set of r33/r34 gtr S-tune coilover suspension, as new.Remote resevoir, very high quality.

Pickup from Sydney, or will post at buyers expense, will post up pics 2morrow.

PS the missus says they're awesome

Cost $1670+post from nengun, sell for $1050

Now also have an r32 GTR bootlid in gunmetal with spoiler, immaculate, spoiler in very good condition

$300

Edited by Adriano
I believe he was asking if the were S-Tune HA as in Height Adjustable

Nah was asking if they were the H's as the ones pictured above are just the S-tune suspension which are just a strut and spring and only worth about 1500 to begin with, where as the H is the coilover type which is worth a bit more....so wrong picture above I thinks....

Thats a pic of them, checked part number with nengun, and it comes up as the S tune H suspension. The S-tune HA looks the same again, the only difference that i can find is that they are to suit an r32 gtr, wheras the H type suits an r33/34. Ill post up the part numbers tomorrow.

Edited by Adriano

H and HA versions are height adjustable, the pics you have put up hav a fixed lower spring seat, ie not adjustable for height. They are adjustable for damping though

S-Tune http://www.nengun.com/nismo/s-tune-suspension-kit

S-Tune H http://www.nengun.com/nismo/s-tune-h-suspension Darker grey and height adj rings

Thank you for that, i wish nengun had better pics, and the H/HA's arent listed as having height adjustable, so i guess i will drop the price. Nengun sell them for $1670 + post, ill sell for $1200

If someone is looking for coilovers that aren't bone jarring these would be a good choice

http://translate.google.com/translate?u=ht...Flanguage_tools

Normal form attenuation power 5 step adjustment system (Fr and Rr) only front reservoir tank attaching height change generation: FR-30mm RR-20mm spring rate: FR6.0 RR6.7 (kgf/mm)

These spring rates are much softer than many of the coilovers out there but stiffer than stock by a margin. Also, if they came from nismo you can expect they are a good tuned match for the car.

Do you know how many K these have on them?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...