Jump to content
SAU Community

Recommended Posts

Please only enquire if you are serious;

For sale: Kayzer 18in alloys. Fronts are 18x10J, rear 18x11.5J with offsets of +2 and -17 respectively. In true Jap form they have stretched 235 and 265 boots with enough tread to get around on for a little while...

Item Condition: Awesome condition - I just had all the minor marks all polished out and cleaned up, almost like new

Price and price conditions: $1950 FIRM

Extra Info: As above, they've just been polished and restored - all centre caps are there, very tough looking wheel and hard to get in these sizes. They look heavy but are surprisingly lightweight - only 1-2kg heavier than factory R32 GTR rims

Pictures: Below

Contact Details: PM

Location: Melbourne

Delivery & Conditions of Delivery: Pick up or we can sort it out

As mentioned in my other thread, here are some measurements to help see if they fit on your car;

145mm front

185mm rear

Those measurements are from the back of the centre of the wheel, where the bolt holes are (the part that sits flush with your hubs) to the outer edge of the wheel. So to see if they stick out you'll have to take a wheel off, measure either of the above distances from your hub to the outer and run a string line...that'll give you an indication of where they'd sit.

Also needless to say, they're 5x114.3 stud pattern.

Cheers,

Chris

post-24809-1181042024_thumb.jpg

post-24809-1181534866_thumb.jpg

Edited by YSR020
ey chris ill come over on the we and well try and fit them to my car, then well do a straight swap for my rims

kthxbai

Yeah Nick - no sweat...15 minutes with the hammer & dolly and they'll fit no worries... :)

very keen please post up some better pics

Hey Trent - here are some fresh pics I took about 10 minutes ago.

btw, I am in need of a (not URAS) full kit from Japan for my JZX90...if you can bring one in perhaps we can sort something out with the wheels if you like 'em... :)

post-24809-1181097500_thumb.jpg

post-24809-1181097572_thumb.jpg

post-24809-1181097999_thumb.jpg

post-24809-1181098062_thumb.jpg

Edited by YSR020

Damn it.. If I had the cash spare I would've bought these straight away (providing you were willing to post interstate).. would suit my widebody perfectly :)

damn thats a hot car!!!!

But i see how they fit lol shame they wont squeeze uder a r33 standered but rolled gaurds or id take them right now!

damn thats a hot car!!!!

But i see how they fit lol shame they wont squeeze uder a r33 standered but rolled gaurds or id take them right now!

...bare in mind R32 sedan has the smallest guards of all Skylines, and R33 coupe has the largest guards of all Skylines... :)

they look real hot i can tell it would be a pain to get them to fit on a r34gtt sedan....even most skylines haha good luck with sale!

Yeah a 4 door makes it a little harder...that said if I don't sell them for this price I'll fit them to my JZX90 MarkII

...bare in mind R32 sedan has the smallest guards of all Skylines, and R33 coupe has the largest guards of all Skylines... :)

lol tempting!!! haha if i was in melb id come around and try them on for sure, but im in adel and would die if i bought them got them posted out and they wouldnt fit! lol

lol tempting!!! haha if i was in melb id come around and try them on for sure, but im in adel and would die if i bought them got them posted out and they wouldnt fit! lol

Haha! That's cool mate...only stirring...but if I had to fit them to any car I reckon 33 coupe would be the most painless of all.

Cheers,

Chris

Haha! That's cool mate...only stirring...but if I had to fit them to any car I reckon 33 coupe would be the most painless of all.

Cheers,

Chris

Which is why i am sussing out my panel beater rite now to see how much he can blast my guards out, since the car is getting painted anyway

Which is why i am sussing out my panel beater rite now to see how much he can blast my guards out, since the car is getting painted anyway

Good man - I like the way you think! :thumbsup:

Also, I may swap for a pair of front BRIDE or Recaro seats plus cash my way...

PM replied to - NO low ball offers. They're cheap enough as they are.

If they're still available in a couple of weeks, and you're willing to post to Brisbane.. I am 90% certain I will buy them off you :rofl:

Unless something drastic happens and I will have to put the funds towards something else..

If they're still available in a couple of weeks, and you're willing to post to Brisbane.. I am 90% certain I will buy them off you :rofl:

Unless something drastic happens and I will have to put the funds towards something else..

No worries man, I'm only a PM away! :laugh:

Also I'm happy to hold the wheels for anyone, if a deposit is given, am in no rush to sell. Price is fixed and will send anywhere at buyers expense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...