Jump to content
SAU Community

Recommended Posts

I also looked today at a gtr gearbox, and the 32 is mechanical and appears to be similar. The out put is the same a a gts but the nut that hold it on is bigger. But i think that you will be able to get around it without changing the whole cable.

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Clint, I am going to do the same conversion... I have a 33 box, but I have not got a slip yoke yet... I would be very interested in getting a one piece tailshaft (u are doing a 1 piece?) done at the same place u get yours done (i need to find a 33 yoke/tailshaft obviously).

  • 2 weeks later...

I have finally got some of the parts organsied for the gearbox swap.

When i got the gearbox i got the fist part of the 33 tail shaft so i only needed to get that lenghened by 600mm, this cost $220.

I have also got the r32 gtr speedo sensor,cost $50 it has a different gear on the end so you need to swap this with the rb25 one for it to work properly. Will be a bit of stuffing around but shouldnt be too hard.

Now i only need to get some urathane to make a decent mount and find some time to put it in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...