Jump to content
SAU Community

Recommended Posts

Tow truck companies know it, driving instructors are certain of it and insurance firms have no doubt about it — Sydney drivers are the worst when it comes to coping with wet weather.

As soon as the rain fell yesterday, many of the city's motorists failed to slow down and take the road conditions into consideration.

More than 100 minor crashes and breakdowns were recorded across Sydney throughout the day as up to 50mm of rain fell on the city. Many more accidents went unreported.

RTA spokesman Alec Brown said there is always a spate of crashes in the first stages of a wet weather cycle because many city drivers suffer the psychological term “Optimism Bias”.

“A large number of drivers have a viewpoint that even though it's wet they can handle the speed they usually travel,” he said.

“They think they know the roads and can handle the conditions.

Source: CarsGuide

Today, in a 90 zone - mona vale road was in the mrs car doing not even 80 cause it was really freakin hard to see, and I had tools flying past me and tail gating me, even though im in the left lane

I think kellogs had a prmotion thingy and shitloads of sydnye siders got their licence from 1 in 3 packs

I find it weird how many drivers dont use their headlights in wet weather, he headlights have 2 purposes, to see and be seen yet many drivers forget this. During my usual 250km of travels today I was doing some random counting in the Blue Mtns this morning and it was about 40% of cars without any lights on at all which is a very high number.

I find it weird how many drivers dont use their headlights in wet weather, he headlights have 2 purposes, to see and be seen yet many drivers forget this.

You wouldn't believe how many f**king retards there are out there that are actively opposed to daytime running lights.

Read that site - its amazing how stupid people are. Anyone who's ever driven on a highway knows how much easier it is to spot other traffic if they've got their lights on, guesstimate how far away they are, and easy determine what direction they're travelling in. All very important data if you're making a wrong-side overtaking move.

That's before you get into dawn/dusk situations where its hard to make out cars with all those shadows.

They crap on about how it blinds / dazzles other drivers. What the hell? You could high beam someone during the day, and because the headlight / ambient light differential isn't that great they're hardly going to get dazzled. Normal headlights don't do squat to other drivers' vision.

I'm all for DRL. I think they should be mandatory everywhere.

Edited by scathing
I find it weird how many drivers dont use their headlights in wet weather, he headlights have 2 purposes, to see and be seen yet many drivers forget this. During my usual 250km of travels today I was doing some random counting in the Blue Mtns this morning and it was about 40% of cars without any lights on at all which is a very high number.

I have often been amazed at the high number of cars not using their headlights in inclement weather. I travel 200kms per day to get to work and have also noticed the lack of hazard lights in fog, particularly on the F6. Furthermore, I was (not) suprised by a P-plater overtaking me doing at least 130 whilst I was sitting on 85-90 during heavy rain and wind on the F6 today. Tailgating in dry conditionsis not acceptable driving behaviour, yet I saw it done often today.

Sydney drivers lose their common sense when it rains.

Also a lot of people suffer from the good old "liquid horsepower" when it rains and cars that cant normally wheelspin are getting sideways every chance they get.

I know! Had an idiot in a ute going up and down the street to test how much he would slide.

Dude looked like a complete retard.

Let me inform all Sydney drivers that LAS VEGAS, NEVADA are the worlds worst drivers in Rain.

Just take it trip to Vegas between Dec and Feb of any year and just watch people drive and slide.

You would think 5" inches of snow had falled.......LOL

Vegas is the worst.

I lived and worked in Malaysia for a while and had the pleasure of driving there and I can tell you that they have got to be the worst, bar none ! To survive I partially had to adopt thier dirving style which was basically is who dares wins combined with keeping the accelerator flat to the foor all the time !

Also a lot of people suffer from the good old "liquid horsepower" when it rains and cars that cant normally wheelspin are getting sideways every chance they get.

i love it.

*prays to rain gods for more rain*

nothing beats mud tho. Dirt roads + rain = hours of fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...