Jump to content
SAU Community

Recommended Posts

Hi Y'all, as the Topic says, I need an Air Filter Box, pref. with snorkel. - South East suburbs preferred.

Also - I get My old 3.75" Straight through Cat-back Xszorszt back this weekend, I'll post pics next week. Make an offer ;-)

CA18DE, CA18DET, SR20DE, SR20DET are all different so I think 33's (de/det) will be different also. The hole for the AFM is on different sides/angles and sometimes there's extra holes and blah blah. (will look at FAST later on and let you both know for sure)

I think we MIGHT have an RB25DET box but I'll have to check later, on way out right now and I can't remember.

I know I have 2x snorkels if you don't get one with the box at least.

I'll send you a PM later :O

~Kaz

Ok had a look.. we actually have an RB25DE box not a DET.

They are virtually the same (DE<>DET) except for the bottom as far as I can tell... ie it fits differently into the engine bay... which might not be a problem but it depends what's underneath in terms of piping etc I would think.

1st pic is RB25DE 96-98

2nd pic is RB25DET 96-98

3rd pic is RB25DE 93-95

4th pic is RB25DET 93-96

They have slightly different part no's but the alternate part no is the same and they look the same, so I don't think there is a difference between series 1 & 2..

Snorkel is the same for both DE and DET.

Umm hope that helps ;)

If anyone wants an RB25DE box, let me know..

post-19275-1182433464_thumb.jpg

post-19275-1182433490_thumb.jpg

post-19275-1182433504_thumb.jpg

post-19275-1182433521_thumb.jpg

And he will pay CASH..

Beats getting 2 chickens and a pig.. :laughing-smiley-014:

:laughing-smiley-014: Gold Wayne!

I tried to think of something to say, when i read the thread last night, but couldn't think of anything clean. :cheers:

Thanks Ferah.

PM me with an offer if you are interested in the box and snorkel.

hhmmm.. . . I was thinking of paying in beer, but then who'd go for that? nobody! so figured ca$h-money is safer :D

I'll probably be putting the stockie intercooler back in (better safe than sorry) and I think I need the RB25DET airbox to clear the return pipe from the factory I/C. So thanks Kaz, but I'll run with the turbo airbox.

actually, now that I think of it.. . . I'd really like 2 chickens & a pig.. . . mmmmm.. . . . Tasty !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...