Jump to content
SAU Community

Recommended Posts

Is it an all W/End thing then?

How far is it from Sydders?

So I guess am toooo late to have a go then this time.

How far from Syds is it, and whats the cost to get in?

How many going etc?. I kinda thinkin if its about on Sunday, my Line should be ok for then, So I might fly down there(depends on this nasty oil leak on fromt of the block)

Sorry about all the Q's, but cant get access to the tube from work.

  • Replies 951
  • Created
  • Last Reply

Top Posters In This Topic

Is it an all W/End thing then?

How far is it from Sydders?

So I guess am toooo late to have a go then this time.

How far from Syds is it, and whats the cost to get in?

How many going etc?. I kinda thinkin if its about on Sunday, my Line should be ok for then, So I might fly down there(depends on this nasty oil leak on fromt of the block)

Sorry about all the Q's, but cant get access to the tube from work.

Read -> http://www.sauvic.com.au/deca

Think all places for the day are filled.

15 Cars last I heard + some spectators

It's on a Saturday 25th Aug. But we stay there Friday 24th and Come back 26th.

It's in shepperton (Country Victoria) It think 6-8hrs drive?

Im new to it too, so I dont really know how or what's going on. :P But im looking forward to it.

Dunno.. Isnt Syd to Melb like 8hrs? and Melb -> Shepperton = 2hrs? Soo.... 6hrs? Im only guessing here. Though I shouldnt ASSuME.

Better be lot's of BeesPee stations on the way.. Might bring a petrol can.

Well according to the BP's triplocator -> Trip : 728.94 kms 8:33 Hours. So I guess it's ~8hrs from Syd -> Shepparton.

Dunno.. Isnt Syd to Melb like 8hrs? and Melb -> Shepperton = 2hrs? Soo.... 6hrs? Im only guessing here. Though I shouldnt ASSuME.

Better be lot's of BeesPee stations on the way.. Might bring a petrol can.

Well according to the BP's triplocator -> Trip : 728.94 kms 8:33 Hours. So I guess it's ~8hrs from Syd -> Shepparton.

I thought Melbourne was 11 hours give or take...? Meh either way... did someone say "ROADTRIP" :P

http://www.bp.com/iframe.do?categoryId=901...ntentId=7024297 <---pretty good site, shows you where you can stop for BeePee stations..

I thought Melbourne was 11 hours give or take...? Meh either way... did someone say "ROADTRIP" :P

With strippers? :P

http://www.bp.com/iframe.do?categoryId=901...ntentId=7024297 <---pretty good site, shows you where you can stop for BeePee stations..

With strippers? :thumbsup:

Haha I so need one of these in my car for future reference!

COrinne those tops look great! Count me in for one indeedy!!

I might be heading down Thurs, make more of the time down there.

Sure thing.. Im just trying to generate a bit of interest.. and see how much pricing will be




  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...