Jump to content
SAU Community

Nismo Dash?

Dani Boi

By Dani Boi,
in Western Australia

 Share

Recommended Posts

syfon Veteran

syfon

Posted
Posted

The epson ej1 is the ecu for the LCD screen right?

Basically one that is the same as what you have in your car - displaying oil pres, boost, speed, rpm, the whole works....

Do you know the jap sites that still sell them?

W0rp3D Grand Master

W0rp3D

Posted
Posted
The epson ej1 is the ecu for the LCD screen right?

Basically one that is the same as what you have in your car - displaying oil pres, boost, speed, rpm, the whole works....

Do you know the jap sites that still sell them?

Yeah, if you dont have the ej1 then the screen is only use for as a tv or reversing camera or some thing like that.

Also there is no oil pressure or boost pressure, it has rpm, speed, power (how it gets the power im not sure but it was pretty close), gforces for accelerating and breaking (no side to side) and then a whole heap of pit stuff that somehow gauges tyre wear and other stuff.

I didnt like it and got rid of it, wasnt really what i wanted, was just a little gadget to tinker with.

Dont remember what site still sells them, will have to do a search.

Kaido_RR Grand Master

Kaido_RR

Posted
Posted (edited)
So basically without the ej1 the screen can only be used as a tv or something like that? I didnt think you needed the ej1 to display speed, rpm, etc.

What does the screen on your dash display?

You can use anything which has a video output; so HKS CAMP 1 or 2, blitz have something similar also, or ej-1 system

there is one for sale atm but at 1.5k+ (no ej1 system but its the sat nav one)

everybody_love_fixie-img400x600-1245472753grf7hp5984.jpg

the screen is just used to display anything (has a video input at the rear of the dash)

Edited by Kaido_RR
W0rp3D Grand Master

W0rp3D

Posted
Posted

What i meant was the hks camp wouldnt work in a skyline, but that lists a cable for the consult port so it should, but only if you still have the standard ecu.

Also i would take note of all the extra bits needed at the bottom of the page you linked to (unless it will all work through the consult port) that was exactly the sort of thing i was looking for, pitty no one told me about the consult port cable back then, just thought it was OB11

Kaido_RR Grand Master

Kaido_RR

Posted
Posted (edited)
Well i guess i better start putting away some $$$ just incase i come across one!

there are 2x Dash for sale atm both are the sat nav price (between $1500-$2000) then there is a brand new epson ej-1 system for sale too price is $600

not cheap :P

HKS CAMP 2 is $650 + $50 for the plug for the nissan + if you any optional sensors they are $150 each (boost, pressure, temp)

but the display is better

analog-mode.jpg

Digital-mode.jpg

Fcon-mode.jpg

Edited by Kaido_RR
W0rp3D Grand Master

W0rp3D

Posted
Posted
read don't need as : Doesn't help you go faster, could be done cheaper with other alternatives, if you don't already have it why bother.

So what your saying is that everyone should do the same things with there cars, no one is allowed to be different or do something that you dont agree with, not all people just want to go faster, most people understand this but there are still some who think modifying a car is all about doing it there way and every other way is wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...