Jump to content
SAU Community

Recommended Posts

Hello all,

Organising a meet and movie to see 2 Fast 2 Furious @ Dandy Drive ins on the 21st of June... Lets make this a big one! Tell one tell all.

Gonna follow the plan from the last drive ins cruise so meet at Dandenong Stock Yards @ 6pm, meet & chat then onto the movie @ 7:30 (starts at 8:30 - gates open 1 hour early).

I recommend that people bring food and drink because stuff is quite expensive there (unless Vickii brings us all food again :P).

I will speak to the cops before hand and promise good behaviour in exchange for no trouble. It was fine last time. And from what I have heard there was no trouble at Coburg on opening night.

Let us know if you're coming. Do people need directions again?

Coming so far (assuming cops don't bother us):

- MaXiMuS007 (with his car back)

- HotSky

- DJ_L3ThAL

- MzDeFecTeD

- 32_envy

Interested:

-RedLineGTR

-Al

(P.S. Not hijacking JET-33's gold class nite, but drive ins are cooler so come to both!)

its awesome

the 34 is fkn NUTZ!

even if u ring the cops, it doesnt matter, theyl just say theyl leave u alone and b there in unmarked cars/clothing...take down plates..and send out letters...

especially at dandy...its like a few kms from the illegal drags which they r currently goin double nuttz on and im tippin its a sat nite too..?

hmmmmmmmmmmmmmmmmmmmmmmm

  • 2 weeks later...

Hrmm so is any1 still coming?

The whole point of this for me was to celebrate getting my car back but as that has been delayed i'm not even in the mood to go any more *cry*

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...