Jump to content
SAU Community

Rb30 Tensioner Choices

Careless

By Careless,
in Engines & Forced Induction

 Share

Recommended Posts

Careless Contributor

Careless

Posted
Posted

hey guys,

i tried checking to see if this was mentioned. I'm putting the RB26 head on my RB30. What tensioners do I use when using the two lower tensioner locations instead of drill tapping a hole near the top flat portion.

I have a gates power grip GT2 150 tooth belt, and it's pretty damn sturdy, so i'll just make a thin piece of metal that separates the two teethed sides in the case of any belt flap or what have you.

so i've noticed that nismoparts.com has two different tensioners. both RB20/25, and 26. someone told me that if i use the RB26 head, i should use the 26 tensioners, but im not sure if the stud or the construction of the tensioner is the same or if the RB30 block itself is suited to RB25 tensioners rather than 26 ones.

Let me know, i want to order everything soon :-D

NA high compression RB30DE on it's way...

Thanks dudes!

Raff

Link to comment
https://www.sau.com.au/forums/topic/175019-rb30-tensioner-choices/
Share on other sites
Adriano Grand Master

Adriano

Posted
Posted

I thought they were all the same. I use the rb30 ones, but its a good idea to get genuine ones, as they are double row bearings instead of single row. You may want to use two tensioners instead of an idler/tensioner, as it will give you more tension adjustment(and save some $$$)]

Careless Contributor

Careless

Posted
  • Author
Posted
I thought they were all the same. I use the rb30 ones, but its a good idea to get genuine ones, as they are double row bearings instead of single row. You may want to use two tensioners instead of an idler/tensioner, as it will give you more tension adjustment(and save some $$$)]

OK, so i'll just order two RB26 ones then, or whatever's cheaper =/

thanks Ad.

Careless Contributor

Careless

Posted
  • Author
Posted
They are the same item.

Call rolling bearings with the part number (do a search on the forum for them) and use the stock NSK bearings. $120 for the pair.

I can get the Nissan OEM ones for less than that here in Canada, shipped from the US.

it will be about 100 CAD when said and done.

nismoparts.com

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

I didn't bother looking at nismoparts as the name nismo usually implies uberexpensive. They clearly don't have much of a clue if they are selling the items as suiting different applications. RB are all the same.

Plus, since you are OS it would help to put your location in the bit over on the left, so I don't waste time giving useless (to you) information.

Cheers

  • 3 weeks later...
Cubes Grand Master

Cubes

Posted
Posted

I replaced my set of tensioners when I recently pulled the head off.

After 60,000km's they were pretty shagged. I was running one single row bearing type and a double row nissan type. Both were just as stuffed. Crunchy and noisy when you'd spin it.

BUT saying that; I was slack; I ran with the gap inbetween the cam belt covers. I was 'gonna' fix it. Ahh well that will teach me lol.

  • 4 weeks later...
Careless Contributor

Careless

Posted
  • Author
Posted
I replaced my set of tensioners when I recently pulled the head off.

After 60,000km's they were pretty shagged. I was running one single row bearing type and a double row nissan type. Both were just as stuffed. Crunchy and noisy when you'd spin it.

BUT saying that; I was slack; I ran with the gap inbetween the cam belt covers. I was 'gonna' fix it. Ahh well that will teach me lol.

What make was the single row bearing type, and is that the difference between the RB26 and 25 versions?

which nissan part number is the double row, I can cross it in the Nissan FAST system.

Thanks cubenator!

Cubes Grand Master

Cubes

Posted
Posted

I have since noticed the VL tensioner runs a wider and larger dia. bearing than the RB20 tensioner.

They were both NTK bearings; the RB20 had a smaller dia bearing compared to the VL tensioner; inside the VL bearing had 2 rows of ball bearings.

I have seen 2 types of rb20 tensioners; one isn't servicable and runs a narrower and smaller dia bearing the other is servicable and runs the same VL dia but a narrower bearing.

The Rb20 idlers run a smaller dia bearing but run 2 bearings side by side which in width is greater than that of the single vl tensioner bearing; but only just.

No idea on the part numbers nothing is stamped on them apart from the NTK bearing number. :P

I'll see if I can get some pics.

Cubes Grand Master

Cubes

Posted
Posted

It appears the origional tensioners on the rb30 from factory ran the good wider bearings; the ones you buy now from holden use the narrow bearing within the tensioner which is the same as what was on the rb20 I have sitting in the shed.

So at one point some one shoved a cheap holden tensioner on it.

So I'd say the tensioners to get are the genuine origional VL ones that are servicable. or just buy from Nissan for a couple hundred lol.

I think I remember the idler from nissan was up over $200!! and the tensioner slightly under. Its been some time but they were damn expensive.

I run the 2 x origional RB30 factory tensioners with the bigger bearings. The 2 I sold recently were also the bigger bearing type. :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...