Jump to content
SAU Community

Recommended Posts

so? this cruise is the main event... some sideshow wont deter people coming on whats shaping as the biggest

non-member/member cruise of the year.

Im not saying that this cruise should change or anything. Hell i am one of its main supporters :thanks: Just saying that a lot of members may want to attend the buxton burger cruise as it has been organised since the start of the year etc and like Redlineingr31skyline said it may all be just too much to do both etc, yet again maybe they won't i dunno. From the way it looks like its shaping up it doesn't appear to have any shortage of numbers anyway, and will most likely be bigger than the members cruise. I'll prob just do both! :P

  • Replies 453
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yea i will,im move to wagga wagga next week, so ill try and get up to canberra to see the guys at ozzy and test fit them.

ill be happy if i have to use a 5mm spacer, just not a 20mm.

thier a +35mm offset

just had a good read through the run. dami need a new box so i can keep up with you guys.

yea i will,im move to wagga wagga next week, so ill try and get up to canberra to see the guys at ozzy and test fit them.

ill be happy if i have to use a 5mm spacer, just not a 20mm.

thier a +35mm offset

just had a good read through the run. dami need a new box so i can keep up with you guys.

I wouldn't be happy with ANY spacers at all, especially when buying new rims :)

I wouldn't be happy with ANY spacers at all, especially when buying new rims :)

yea im the same. but i happy with 5mm no more.

unless you can get mea +30mm 17 x7, that wont cost me my left nut ill buy it

yea im the same. but i happy with 5mm no more.

unless you can get mea +30mm 17 x7, that wont cost me my left nut ill buy it

Do you know what you are saying? :laughing-smiley-014:

How are you the same if you are happy with 5mm spacers?

lol ye was plannin on doiing a wash meet sat night

if i can find a car wash with a big carpark i will post one up

you want a big car park, then go to car wash in epping on childs rd, its big buti think it closes at 11:30 or 12 on a sat.

You might want to try the car was on the corner of Heatherton and Springvale roads. There is a huge car park for the Waltze pub and a Maccas on the opisite corner that's open until 2pm on a Sat. Plus a carpark for the park about 100m from the intersection.

I'll have to check again, but I think the wash is open 24/7.

I guess the only problem for some people is it is in the opposite direction to the cruise.

the unsure list is starting to get smaller and the main list bigger. more cars have confirmed through pm's to me.

so those on unsure, make sure you post or pm to confirm your spot. we wont be waiting around, so make sure i know your coming.

list updated

You might want to try the car was on the corner of Heatherton and Springvale roads. There is a huge car park for the Waltze pub and a Maccas on the opisite corner that's open until 2pm on a Sat. Plus a carpark for the park about 100m from the intersection.

I'll have to check again, but I think the wash is open 24/7.

I guess the only problem for some people is it is in the opposite direction to the cruise.

That sounds pretty good, not too far for me. I drive past there pretty often, but never really paid much attention to the carwash there. I'll check it out on the way home tonight & let yall know, such as number of wash bays, size of parking area, etc.

It shouldn't matter too much that it's the opposite direction of the cruise, as it's the night before anyway.

Im keen for this cruise for sure.

Anyone from south eastern suberbs interested in meeting early and headin over as a group?

Could meet at Dandenong train station or sumthin like that?

brett

That sounds pretty good, not too far for me. I drive past there pretty often, but never really paid much attention to the carwash there. I'll check it out on the way home tonight & let yall know, such as number of wash bays, size of parking area, etc.

It shouldn't matter too much that it's the opposite direction of the cruise, as it's the night before anyway.

I checked it out tonight, and it's a pretty good location.

There's 4 hand wash bays with the high pressure hoses and also 2 touch free automatic bays (for those of us who are too lazy).

There is also heaps of parking around the car wash because there's a motel, pub and some other stuff that all share a big car park.

I'm sure even if we have 20 cars there it shouldn't be a problem getting parking :(

I'd be up for this as I'm sure the car will need a wash by then. Perhaps around 9pm on Saturday September the 8th?

Im keen for this cruise for sure.

Anyone from south eastern suberbs interested in meeting early and headin over as a group?

Could meet at Dandenong train station or sumthin like that?

Well, there's already a pre-meet in cambellfield. I guess if there's enough interest we could have a pre-meet to go to the pre-meet, but that'd probably get confusing :(

I'll be going along this route (no city link cos I'm cheap) and up the Hume to the existing pre-meet, so who knows, we'll probably see a few 'lines along the way.

list updated. if there is enuff interest from the south east, dilmah might be able to organise something small between pm's and meet in campbellfield? or at the servo in little river.

massive is not the word, gigantic, enormous and humungous.!!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...