Jump to content
SAU Community

Recommended Posts

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

post-3771-1183636871_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/175478-complete-built-rb25-800ks-old/
Share on other sites

Have a couple of people interested. But nothing solid yet, so still here waiting for YOU!!!

This is a guaranteed 300KW ATW package. Just ask thizzle on these forums, i've followed very closley followed his formula for sucess......Come get it..... :nyaanyaa:

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

hey

interested in selling just the bottom end with n1 oil and water pump, tomei head gasket?

send me a msg or call after 5:30 if you like, im keen depending on price

interested to know what price (if seperating) for block and head itself. Dont need injectors, plenum, turbo, coil packs, exhaust manifold.

Thanks

Second that (but I want injectors)

Thanks

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
if you decide to separate, interested in the turbo if it's only done 800k and it's reasonably priced

keen on injectors and splitfires also if only 800 k old and of course the right price.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...