Jump to content
SAU Community

Recommended Posts

hi all.

As you guys are aware, the skylines (R32 and R33 gtst that I know of) have a clutch fan system for the radiator cooling.

Recently my one has been staying on for longer and longer.

even on cold nights when not trashing or anything.

I'm guessing that the clutch system is starting to go or something.

Normally when the revs reach about 3000rpm it would die down and let the engine spin on it's own (like it should) but now it just keeps holding all the way to 5000rpm some times.

My question is..

Is there a way to REPAIR this?

Does anyone know exactly how the system works?

Does anyone know the cost of a new fan and clutch thingy?

I do not want to convert to an electric fan or anything like that.

I just want my one to work as it should.

thanks.

Link to comment
https://www.sau.com.au/forums/topic/17591-clutch-fan-question/
Share on other sites

I had the same problem with mine. The genuine assembly is about 350, davies craig do one for 175 (which I bought and has worked perfectly since) and is available at most parts places. I have heard that you can repack or replace the main bearing for a few bucks. I wish I had known that in the first place but it is fixed now so I should not complain. It is really easy to remove and replace the unit by yourself too.

Hi GTST, ours chucked it in as well, same symptons. You can check it with the egine off, just try and turn the fan by hand. It should turn easily, if is a bit tight it's OK for a while, ours was locked solid. We got a good used one from a dismantler, didn't cost much, shop around

Mine seized a while back and smashed my radiator :P

Any particular reason why u don't want to goto electric fans?

Any major problems in doing so? Im thinking I might change soon depending on the problems, hate the sound of the clutch fan, and with a fmic in place electric maybe the way to go.

uve cursed me!

My water pump is making this shit bearing noise now, this is my fkn 3rd pump....1st 1 seized and took out all my shit with the fan. 2nd up just blew while letting the car cool, and we're now here...Ive tried turning the fan by hand with the engine off, and its feeling as tight as a 16 yearold catholic girl :(

mofo off to the mechanic we go

my clutch fan did the same

i replaced it wif a davies craig 12' thermo fan

the car feels alot more responsive

i havent done any checking of water temps but the car hasnt seemed to be running higher temps at all

brody - try a davies craig electric water pump, works better than the water pump we have, it keeps flowing water after the engine is turned off, making less heat soak of the engine

nah on the fan, u have a switch thats connected to a thermostat, and u select at what temp u want it to come on, at what temp u do, u turn it till it click and thats the temp that it will come on at

do ya get what im sayin?

the water pump im not sure how that works as i havent put one in yet

Just on the matter of going electric, my experience is it's not so straight forward.

With a FMIC in place, the engine would easily overheat.

I finally worked out what the problem was after reading a single sentence in a new book:

"Is the air going through the radiator?"

So I went outside, opened the bonnet and peered down in front of the radiator. What did I see? - the ground :P The air was hitting the FMIC and basically finding the easiest route was down and underneath the car, NOT thru the FMIC and the radiator.

So, I put the clutch fan back on, and no more overheating.

If you want to go electric, the solution is to build a sort of undertray that blocks off the area between the bottom radiator support panel and the front bar. And maybe put some flutes / vents in the bonnet.

Also, the A/C radiator (the one immediately in front of the radiator) relies on the engine fan to draw enough air to cool the gas. If you only have an electric fan, then the gas over-pressurises and sounds like a BOV. You need to have the little fan out front (which is thermo-activated by the sensor in the bottom of the radiator) re-wired so it comes on with the A/C.

FWIW.

my outside thermo fan is also wired to the A/C.

I am planing on puting some sort of vent just above the gap between the radiator fan and the engine block.

sort of like the vents that are on those aftermarket carbon fibre bonnets.. like a long slot from left to right..

that way, the heat that is sucked out of the radiator has an easier route out of the engine bay..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...