Jump to content
SAU Community

Recommended Posts

hey guys ive just replaced the rb20det in my ceffy with another 1 i got it all hooked up and started it and didnt seem to run right it sounded like the timing was out and wasnt firing properly and also pissing out black smoke so somehow to much fuel. i though it might of been an electrical fault since then i have had it at the auto electrician and he cant find any problems in the ecu or harness. the coil packs and sparkplugs are fine to. its possibly the crank angle sensor but thats all i can think of anyway

would any of u guys have an idea of wat i mean or would be able to help solve my problem?

cheers wes :D

Link to comment
https://www.sau.com.au/forums/topic/176059-problems-with-my-rb20det/
Share on other sites

Clean all the sensors with contact is the first thing id do and also make sure all the wiring to the sensors is done properly. get timing checked (cas should be dead centre), also find out if your acutally running rich or lean as even tho it spits black smoke it might be leaning out everywhere else.

Edited by Mrlag
Clean all the sensors with contact is the first thing id do and also make sure all the wiring to the sensors is done properly. get timing checked (cas should be dead centre), also find out if your acutally running rich or lean as even tho it spits black smoke it might be leaning out everywhere else.

well all the electrical is fine so im told. but yea im gonna get the timing done tommorow along with the cas. but with the black smoke it wasnt there before wen running my old rb20 and i have tryed a new afm and it made no diffirence but somehow it seems to run better with the afm unplugged :D so yea not quiet sure

32 motor or ceffy one?

you swap the things over you needed to?

um i had originally the r32 rb20 in it and swapped with another rb20 from an r32 aswell so it should run just the same as the last one shouldnt it?

all being well that is but yea it was just a basic swap

hey guys just letting u no i changed the injectors and a new fuel rail and diffirent coil packs now its doesnt seem to have spark :) maybe i havent put a plug back in properly but yea i cant see a plug that hasnt been plugged in.

so im getting fuel ok now but no spark would any1 have any ideas?

hey guys just letting u no i changed the injectors and a new fuel rail and diffirent coil packs now its doesnt seem to have spark :thumbsup: maybe i havent put a plug back in properly but yea i cant see a plug that hasnt been plugged in.

so im getting fuel ok now but no spark would any1 have any ideas?

Swap the igniter over? make sure the plug is ok on the igniter?

Swap the igniter over? make sure the plug is ok on the igniter?

Hey mate yea ive had the ignitor swapped over to see wat was causing the problem the ignitor was good but that was about a week ago and i havent started it since so yea im thinkin possibly "cas" becuase it wont start now

cheers mate

check ur afm as mine was farked and pissed out black smoke also! cleaned the afm and all fixed!!!

hey man wen it was at the auto electrician they swapped the afm with a good one but still no good. the car actually ran better with out the afm plugged in :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...