Jump to content
SAU Community

How tall are you guys with R33 GTS-T's?


Recommended Posts

I'm 6'4" and I have a sunroof in my R33. Depending on how I style my hair, my hair may or may not touch the roof lining... can be quite irritating at times. So I just lean my seat back a little and no more rub!

It is a tight squeeze though. I am seriously considering getting a lower seat for myself!

Yeah, I am 5' 10/11" and my head comes pretty close to the roof, but I also have a sunroof. I am going down to Queensland raceway in a couple of weeks, never thought about it before, I hope the helmet won't be an issue!

EXACTLY!

Well done hippy!

I quoted mine in feet and inches coz everyone else did... but i HATE the imperial system! So stupid, the metric system makes so much more sense!

How is it better to measure in a system where measurements are based on the size of a kings foot, thumb and god knows what else...

WTF is a yard based on?

Where TF did they pull degrees Farenheit from?

WTF is a mile based on?

It really shits me!

So let me redeem myself by stating that I am 192 - 193 cm tall

A yard is an average man's stride (allegedly).

I think a mile is the distance an average man can run with a burning, rolled-up newspaper sticking out his arse before he suffers 3rd degree burns to his sphincter.

I use metric for everything, except height.......dunno why!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...