Jump to content
SAU Community

Recommended Posts

Everyone that has a 2003 coupe might experience this.

I started my car this morning usually let it idle for 5 mins to warm up.

When i took off doing under 10km/h the car changed from 1st to second. I got this grinding/ recoil noise from the front. After that it didnt happened. I stopped and tried it again nothing even when changing gears on the highway.

Second time started it up after 5 hours put it into DRIVE, drove under 10km/h changed 1st to 2nd same thing grind for a split second then nothing.

Im a member of the G35 club in the USA, asked them questions and there were even threads regarding this matter. Apparently its the ABS initialising and doing a check. Some of the guys own 05, 06 & 07 models. They said it happened to theirs after only having 1000km/h on the clock. So it must be the ABS checking. There are probably a dozen threads on this problem and all the guys said its normal. Anyone experiencing this?

Yep, got the same thing in my 05 Coupe.

Was a bit worried the first time I heard it, but then as you said noticed it was only doing it when you first drive after start up, so I assumed, don't laugh, it was some sort of pressurising of the brake fluid, in the lines.

Good to know it's normal :-)

Yep, got the same thing in my 05 Coupe.

Was a bit worried the first time I heard it, but then as you said noticed it was only doing it when you first drive after start up, so I assumed, don't laugh, it was some sort of pressurising of the brake fluid, in the lines.

Good to know it's normal :-)

Yeh, That is ABS test or inital something.

If you are luck put your food on break pad at the same time (Just like me when i approch the garage door ) you will fell the pad same same respond as ABS break kick into in hard breaks.

That is common take it easy.

Coming to think of it and describing the exact noise i wound't say its a grinding noise. Think of a spring recoiling thats what it sounds like.

Yep normal it is even mentioned in the owners manual that I got with my car. It was printed by the company that complied the car.

I don't experience that.... hmmm. Maybe thats cos I have reset my ECU cos previously all warning lights used to come up... Since then, I've experienced little any electronic intrusion compared to before when my VDC used to cut in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...