Jump to content
SAU Community

Recommended Posts

Hey if anyone has a harmonic balancer puller on the gold coast that wouldn't mind lending it to me, let me know. I have stands, trolley jack, ramps, creeper if anyone would like to borrow in exchange for lending the puller.

Cheers

Dane

Go to Super Cheap buy one take it home use it ,put it back in original packaging take it back to Super Cheap tell them it is the wrong one, get refund ,to easy. :rolleyes:

Hey if anyone has a harmonic balancer puller on the gold coast that wouldn't mind lending it to me, let me know. I have stands, trolley jack, ramps, creeper if anyone would like to borrow in exchange for lending the puller.

Cheers

Dane

i have one but its in SE Brisbane you can borrow it

where abouts in se brissy...? just roughly (but less rough than 'se brisbane' :stupid: )

and i couldn't' possibly do something as unethical as that to a company like supercheap......

yeah the only thing that bothered me was the harmonic blancer and a few other things people had spoken about being tricky. but i came across sydneykid's how to with pictures and it made everything heaps clearer.

plus, saving cash is what it's all about :thumbsup:

Its fun the first time but easy after that, as long as you got a 27mm socket, harmonic puller, and rattle gun and air compressor its so simple just time consuming been there and done it before not hard once you get the first time done :( and springwood/underwood area dane

Its fun the first time but easy after that, as long as you got a 27mm socket, harmonic puller, and rattle gun and air compressor its so simple just time consuming been there and done it before not hard once you get the first time done :) and springwood/underwood area dane

please as if u need a rattle gun. i havent used a ait compressor or rattle gun in over 18months.. sad i knw.. i do everything with hand tools. yes i built the RB sil with hand tools lol :)

no air tools for me unfortunately, i'm going old school -> no experience, few tools and all trial and error if i do something wrong i'm sure it can be fixed :S it just may cost a lot more, but at least i'll know what not to do :)

p.s. lucky you can piece together enough knowledge from the diy's on this forum

Edited by made_guy
lol....thats y im lucky that im an apprentice mechanic....do everythink to my car at work, have all the tools....and get a mechanics discount on parts :)

so ur like marki, but with more experience? :sorcerer:

lol....thats y im lucky that im an apprentice mechanic....do everythink to my car at work, have all the tools....and get a mechanics discount on parts :D

that's why you're our new best friend :santa:

so ur like marki, but with more experience? :sorcerer:

lol.. thats funny.. real funny. im not gonna get into this lol.

shane is this gay :sorcerer: :sorcerer: :sorcerer: :sorcerer: :sorcerer: :sorcerer:

dude you shouldnt even joke about shane working on anyones car.

ahahaha.. he breaks more cars than builds them.

no air tools for me unfortunately, i'm going old school -> no experience, few tools and all trial and error if i do something wrong i'm sure it can be fixed :S it just may cost a lot more, but at least i'll know what not to do :(

p.s. lucky you can piece together enough knowledge from the diy's on this forum

lol.. yeah u can. DIYs are cool.

thing is. the timing of a car is extremly important. out by a tooth will make her run like a dog. wrong tension on a bolt can cause it to come loose. and worst off. if ur timing is wrong a bit more valves can hit pistons and u have a build in the making. so saving a few hundred $$$ can cost u a 5k build :D

Borrow Shanef, people tell me he is a tool and a puller :D . But i dont know if he is balanced .

atleast im a good quality one :D

dude you shouldnt even joke about shane working on anyones car.

hit any embankments lately? :(

lol.. thats funny.. real funny. im not gonna get into this lol.

shane is this gay :sorcerer: :sorcerer: :sorcerer: :sorcerer: :sorcerer: :sorcerer:

ahahaha.. he breaks more cars than builds them.

sif not bite marki :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...