Jump to content
SAU Community

Recommended Posts

Probably silly question, but ever since getting car R32 GTSt, 1992, Front suspension bottoms out VERY easily ( does'nt need a pothole), almost any reasonable irregularity in road surface will do. Car handles well, seems standard specs. Is this really normal?? Had car 3 or 4 or more years. Always been same.

Link to comment
https://www.sau.com.au/forums/topic/178438-front-bottoms-out/
Share on other sites

is the spring rate correct? if you push down on the front guards ( just near the front wheel ) can you push it down fairly easily? or is it pretty firm ?

are you sure there is not a plastic guard hanging down further than the rest of the front bar?

Or are you using lowered springs with stock shocks? That'll do it as well..

james.

I always thought it was standard, but maybe not. I had a look under it to-day, and in theory there's plenty of suspension movement. Nothing to limit it, that I can see, but in fact it doesent move much before it bottoms out ( hard !! ). I came to conclusion it had to be limiting in the Shocks, somehow. Suspension not too soft, quite firm, so I think have to come down to mis-matched Shocks. Does anyone know where to measure the ride height, and what it is standard factory setting?..'92 GTSt. ?

I know it's off topic but reading the title of this thread didn't give me any hint that you were talking about cars. :D

Maybe the shocks are just shagged - take it to a suspension specialist and get it sussed out.

same as above i thought you was sagesting some poron action.

anyway my r32 does this bad ever since instaling aftermarket springs on my standard shocks. i new this would happen but didnt realy mind to much. i finaly got around to getting it checked out by a suspension workshop and they saud the front shocks were shagged, the bump stops also needed replacing.

i am anly now 9months down the track getting some new front shocks to fix the proble. i will be happy if it does. i think if you check out sydney kids group buy on suspension you will find that he reccomends cutting the bump stops depending on ride height but dont do this with the standard stuff.

same as above i thought you was sagesting some poron action.

anyway my r32 does this bad ever since instaling aftermarket springs on my standard shocks. i new this would happen but didnt realy mind to much. i finaly got around to getting it checked out by a suspension workshop and they saud the front shocks were shagged, the bump stops also needed replacing.

i am anly now 9months down the track getting some new front shocks to fix the proble. i will be happy if it does. i think if you check out sydney kids group buy on suspension you will find that he reccomends cutting the bump stops depending on ride height but dont do this with the standard stuff.

NOW I really don't know what's the problem. Just had wheel off to have a good look. Could'nt find any bump stops from underneath car. Good reason I could'nt find them - There are none!!. Can't see any place where any such thing could be fitted,either. Don't understand what locates bottom of coils around shocks ( Bilstiens ), theres a plate there which just seems to "be there" around shock body. Can't see what keeps it there. About 100mm available movement on shock absorber, which would translate to about 170 / 180mm at centre of tyre. More than enough. Any more and tyre would touch inner guards. Only moves a FRACTION of that before it bottoms out on something. I really don't get it. What am I missing???

same as above i thought you was sagesting some poron action.

'mazing !!! Thought it was suggesting some porn action. Maybe later, when I've got over this problem. Does anyone know how to change name of thread, so more ppl look at it? If so, do it!! But is anyone sure that suspension probs will get more attention than porn ?????

bump stops are on the shaft of the shock. inside the coil.

Ta,

Looked there. That's where I have around 100mm available vertical movement, which should give plenty movement at tyre. I'll keep looking. There is an explanation for everything. There is no magic.

yeah I too thought it was a " show us your front bottoms " type of thread.. but I tried to be helpfull all the same haha..

hey.. another thing you COULD do .. but its frought with possibilities to hurt yourself haah.

jack the car up and get it up on stands.

then get a trolley jack and see if you can stick it under the tyre or under the suspension arm to emulate the shock traveling over a bump.

Please dont miss my disclaimer about a strong possibility of self harm, or get a mate to do it and sit back with a few beers and enjoy the hilarity!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...