Jump to content
SAU Community

Where To Go For A Nice Dyno And Tune

AlexR34

By AlexR34,
in Queensland

 Share

Recommended Posts

AlexR34 Proficient

AlexR34

Posted
Posted

YO YO,

I am looking for a local dyno place in Southeast QLD area prefably. Or maybe its not a dyno that im looking for because i dont know much about dynos.

basically i wanna take my car to a place to get a full test and maybe some minor tunning. My car is pretty much stock r34 sedan auto non turbo. Anyways, I want to get a compression check, leak down test, how many kw's/or horse power its currently pulling at the rear wheels, check for any ecu errors, just basically a big diagnosis of the car, whats this test called, and where should i go to get one, ive had the car for about 2/3 years now and I just wanna know whats happening internally.

So give me your recomendations :santa:

Also the cheeper the better, cause as n15mo will tell you im a tight ass lol

Cheers All.

53XYN Veteran

53XYN

Posted
Posted

Why dont you try Godzilla motorsports see MArk he checked my car out after a dyno day cost was 400 bucks complete checkever and dyno runs x2 compression checks etc.. depending on what else you want looked at.. but any decent workshop can do the checkup your preferance who you want to have your car ...

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
Why dont you try Godzilla motorsports see MArk he checked my car out after a dyno day cost was 400 bucks complete checkever and dyno runs x2 compression checks etc.. depending on what else you want looked at.. but any decent workshop can do the checkup your preferance who you want to have your car ...

Nah thats too much i dont care about my car that much lol.

I live in browns plains and there is some dyno place behind the autobarn there, they were doing dynos for like 60 bucks, i dont expect it too cheep just a normal price for some normal tests.

God cars are such a money pit, swear to go im gonna get a toyota yaris for my next car.

markimak Grand Master

markimak

Posted
Posted
you do know that the yaris is the car of choice for the gay community. just keep that in mind.

lol im getting my friend who isnt on the new P laws to forget about a performance car and get a 5door yaris. should be awesome.. its a girl though.

nothing wrong with the yaris.. best small car imo.

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
prepare for ~95rwkw!!! lol

95 rwkw is awsome lol, beets the shit out of walking anyday lol.

Yes yaris is gay and girl car, but its cheap as poo to run and its 20k for a brand new car (top of range model is 20k ish)

Benno- Community Regular

Benno-

Posted
Posted

how did a dyno thead become a discussion about the yaris!! haha

Dyno Dynamics is near autobarn in moss st.

there was a dyno day @ the auto barn on sunday was $35 for two dyno runs.

They seem to know what they are doing there, i would trust em.

i ran 203.3 HP with stock boost, pod and front mount on sunday!!

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
how did a dyno thead become a discussion about the yaris!! haha

Dyno Dynamics is near autobarn in moss st.

there was a dyno day @ the auto barn on sunday was $35 for two dyno runs.

They seem to know what they are doing there, i would trust em.

i ran 203.3 HP with stock boost, pod and front mount on sunday!!

Oh k, ill give them a ring then, thank for the heads up.

n15m0 Grand Master

n15m0

Posted
Posted
Nah thats too much i dont care about my car that much lol.

I live in browns plains and there is some dyno place behind the autobarn there, they were doing dynos for like 60 bucks, i dont expect it too cheep just a normal price for some normal tests.

God cars are such a money pit, swear to go im gonna get a toyota yaris for my next car.

tightarse!! :(

For $60 you will only be getting a power run on the dyno...anything else will be extra. Have u done ur 100k service?? Maybe start a thread on tht too :D

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
tightarse!! :)

For $60 you will only be getting a power run on the dyno...anything else will be extra. Have u done ur 100k service?? Maybe start a thread on tht too ;)

Ahahaha n15smo you crack me up, i dont really care about the power run i care about the engine checks, which is what i really want. I didnt get full 100,00k service cause most mechanics want my 2 nuts when the see me drive in. However, ive changed the timing belt, all the other belts in the car aircon etc. And ive replaced all the fluids and cleaned the throttle boddy a little while ago, i didnt change the water and fuel pump cause the guy who did my timing belt and other belts said they were pretty much new.

Keegs Grand Master

Keegs

Posted
Posted

Your thread title states you want a "dyno and tune"?? For $60 there won't be any tuning going on...and if there is, it won't be good! Why not spend more money and get a decent dyno tune and a decent check over? Otherwise, why bother?

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted

Thats true keeps, i dont really care about the tune, i just want to get some tests on the engine done just to see if theres anything wrong anywhere cause i plan to keep the car for much longer.

The car runs fine i always service it with motul oils every 5,000k's the oil in the car is pretty much always brand new i drive like a granny aswell these days. I just want to get all the electrics and the engine checked, whats that test called and where can i get it.

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
my na 34 pulled 110 kw on a dyno, yours being auto probably around 90-100

gonna do it up? :glare:

Nah im over cars, im making it a daily cruse ive already closed the cannon, im gonna replace it with some small pipe probably, pipes on both side like dual exhaust illustartion oo oo lol hopefully that will quite the f**kker down lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...