Jump to content
SAU Community

Recommended Posts

Hi all,

I need some help with a quote I got....

Have a read and let me know what u think.

Also if anyone knows a good workshop who i can speak to to get another quote...

What I wrote to workshop...

Hi,

I Pm'd u a month or so ago regarding some work that i wanted to get done.

I have since got a oil cooler and filter relocator. I have also go an adjustable exhaust cam gear. I am looking to getting both fitted and the cam gear tuned.

I have a 96 r33 S2 and would like a timing belt change as well

Can you give me a quote for the work mentioned above? I am also a member of SAU NSW.

Looking forward to hearing from you soon.

Thanks!!

The reply...

Timing belt $90 recommend idler and tension bearing change and we use GTR idler which is slightly stronger and $220 for the pair, optional 76.5 C opening thermostat $36 waterpump $130 and premix Elf Coolant $6 a litre adn about 7 litres, workshopsupplies solvent, sealant enviro levy etc $15 labour 98 an hour and about 4 hours and if dont have get adj exhaust cam gear which often makes 10rwkw plus and $150 to checkand set on dyno. Can do late next week or later.

Thanks!!!

Link to comment
https://www.sau.com.au/forums/topic/178826-quote-help/
Share on other sites

hey brendan

saw you at casula shops not long ago but didnt say hi

anyway, give brad a pm, and fit the oil cooler yourself. its the same as changing the filter but you have to mount it somewhere. mine is in front of the drivers wheel. pm me if you want an exhaust cam gear, i have an aerospeed one for cheap if your interested. its not like im far away either.

cya

Link to comment
https://www.sau.com.au/forums/topic/178826-quote-help/#findComment-3267608
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...