Jump to content
SAU Community

Recommended Posts

Hi, I tried to polish car before.....

There is now many swirl mark on my car. My car is dark blue colour.

I have used Mequires step 1 paint cleaner, using random oribital buffer with soft foam pad.

I still can see alot of swirls after that,

then i use Ultra Gloss paint cleaner....

Then i use UltraGloss DGS wax......

1. what to use to polish out swirls?

2. do i have to use by hand to polish all the way through??

3. Is the mechine buffer make the swirl?

4. what to use to make the car showroom shine? I've try Mequires Deep crystral polish, Mequires Deep crystal canubra wax, Facerla top performance wax?

5. What is clay do?? help shiny?

Link to comment
https://www.sau.com.au/forums/topic/179143-polish-out-swirl/
Share on other sites

may help to let us know what steps you use to polish you car.

clay is used b4 polish after washing.

what i do is:

wash

clay

wash

meguires scratchx if needed

mother's paint cleaner

remove when dry with soft cloth

meguires deep crystal polish by random orbital sander with a lambswool pad

let dry properly and remove with microfibre cloths

meguires gold class liquid wax by hand using one of their applicator pads

gentle buff off with fresh microfibre cloths. always using clean ones

Similar to what Basti said, but in the past I have;

-Washed the car, not with the brush at the car wash but with a sponge (car wash brush creates the swirls in the paint!)

-Chamois the car until its dry

-Use Meguiars Scratch X (apply lightly with an applicator, wait a few minutes, then buff off)

-Use a microfiber cloth to remove any hardened/removed residue of polish

-Apply some Meguiars Gold Class polish (apply lightly with an applicator, wait a few minutes, then buff off)

-Use a microfiber cloth to remove any hardened/removed residue of polish

And it should be looking pretty damn shiny about now!

Meguiars polish is definitely worth every cent, if you go into Autobarn you can grab a different combination of sets available will applicators and a lint free cloth as well.

Highly recommended, used it in the past, and was recommended by a friend, and I wouldn't use anything else. Really really good results.

Thanks,

Abu

my mates mate is a auto detailer, after polishing (final step) wash the car again and chamoise dry... removes swirls. probably also depends on what brand you use too... merguires and mothers from what i have experienced are good brands

Wash it again after hey, never tried that! Although when I do rinse of the car later when it gets a little dusty, and chamois it again it does come up pretty mint.

Will have to give it a a go! :sleep:

Thanks,

Abu

When i buffed my car i used Farecla G3 cutting compound

Followed by 3M Perfect-it II foam pad polishing glaze- This removes the swirls left by the cutter and cleans the panels.

Then follow with a normal hand polish.

There is another 3m product that is good for removing 'hologram' marks that is sometimes noticable on dark coloured cars.

Can't remember the name of it off the top of my head but if you take your time and buff your car properly you wont need to use it ! :nyaanyaa:

Hope this helps

Rich

When i buffed my car i used Farecla G3 cutting compound

Followed by 3M Perfect-it II foam pad polishing glaze- This removes the swirls left by the cutter and cleans the panels.

Then follow with a normal hand polish.

There is another 3m product that is good for removing 'hologram' marks that is sometimes noticable on dark coloured cars.

Can't remember the name of it off the top of my head but if you take your time and buff your car properly you wont need to use it ! :nyaanyaa:

Hope this helps

Rich

Same here but I only use G3 to remove large scratches, then go over with G4 and the Farecla fine white foam, and finish with Swissvax Onyx wax, I've use Farecla compounds for the 18 years I've worked in the Car repair trade, and still recommend them.

Pic of the last time I buffed and waxed my car (which is dark blue pearl)..

waxzy7.jpg

Same here but I only use G3 to remove large scratches, then go over with G4 and the Farecla fine white foam, and finish with Swissvax Onyx wax, I've use Farecla compounds for the 18 years I've worked in the Car repair trade, and still recommend them.

Pic of the last time I buffed and waxed my car (which is dark blue pearl)..

waxzy7.jpg

So, do you recommand Farecla top performance wax?? Are they better than Merguires?

But there are alot of people happy with the jobs with Merguires........

AND, do i always have to use hand polish???

So, do you recommand Farecla top performance wax?? Are they better than Merguires?

But there are alot of people happy with the jobs with Merguires........

AND, do i always have to use hand polish???

If you meen there Gold top machine polish? then its ok, dont last long though, There black top hand glaze is good for cleaning off water marks etc but again dont last long, there Topwax is ok to but only lasts 3 months and does not give a good a shine as most wax's, I use the Swissvax wax as its really good top quality stuff that lasts for ages :nyaanyaa:

Edited by DriftyR33

There is a stickied thread at the top of the cosmetics section that discusses detailing Click Here.. many opinions so you will have to decide which advice to take on board.

A few points..

There is no point letting a cutting compound dry.. it is not there as a coating so buff it off with a microfibre towel when you're done with that section of the paint. The longer it sits there the harder it will be to take off.

Once you have your cars paint swirl free it is the washing of the car where you will produce the most scratches after that. I don't wash my car with a sponge anymore I use a Microfibre Wash Mitt, some use lambs woll mitts. I wash all of my Microfibre towels and wash mitt after washing the car in the washing machine with a small amount of laundry liquid (DON'T add fabric softner). You can't clean the dirt out of a sponge so it will stay trapped in it and scratch the car next time you wash it.

Here is a link that goes through how to wash a car to try and prevent swirls. I know it sounds a bit silly to watch a guy wash a car but the guy is Mike Philips, who is Administrator for Meguiarsonline and runs meguiars how-to classes (he knows what he's talking about). Every little bit of info helps in my opinion so have a look.

http://video.google.com/videoplay?docid=75...owcargarage.com

This is my opinion and I know other people will have theirs so don't flame me if you disagree, give me an explaination as to why you do and I'll definitely take it on board.

Edited by Fry_33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...