Jump to content
SAU Community

Recommended Posts

And you'll always just be another loser.

You know you're an e-loser.

You've got numerous threads in PF showing just how much of a loser you are.

Just a matter of time before the real world catches up.

Get started on that pink interior. I can't wait to write about it.

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Guest INASNT

poyz

just remember u will always be my hero!

and if u think your car is something so powerful, its not, these are the types of powerful machines i work with every day designing and engineering and get payed a packet to do it 2!!, not that i need to prove anything to u!

attachment.php?s=&postid=320525

yes thats right 12,500 BHP at 600rpm

attachment.php?s=&postid=320527

attachment.php?s=&postid=320529

i can show u stuff about mechanics u didnt even know existed!

so dont think u have anything over me u DONT i can run many a circle around u if i wanted 2!

Thats all i have to say about that!

now back on topic!

I got the circuit diagram for a R32 sumwhere in my mass of rubbish... I'll get Dr Drift to wire mine up when I see him next.

Only problem, it relies on the lock of the drivers side door to activate it. It involves putting a resistor between the lock power switch and the side mirror switch. And a couple of other things.

lock the doors and the mirror goes in, unlock the door and the mirrors pop out. Its not that hard according tot he system and it will work with any alarm that locks doors.

Only problem the designer (some Jap R32 owner) stated was if you lock the doorswhile driving then the mirrors fold. He was gonna put an over-ride switch in the circuit, but I never found that copy.

Oh and the circuit diagram is in japanese.

Oh my, you're such a f*cking twit INASNT.

You've been working as a Mech Eng for how long now?

You're so far up yourself it isn't funny.

My dad's been a Civil Eng for ~40 years. Don't show off, it wont impress me. You don't compare to what my dad shows me you twit.

Anyway, anyone can surf the web and find pictures like this. For all we know you're a bum with too much blue/pink paint.

Originally posted by INASNT

poyz

just remember u will always be my hero!

and if u think your car is something so powerful, its not, these are the types of powerful machines i work with every day designing and engineering and get payed a packet to do it 2!!, not that i need to prove anything to u!

attachment.php?s=&postid=320525

yes thats right 12,500 BHP at 600rpm

attachment.php?s=&postid=320527

attachment.php?s=&postid=320529

i can show u stuff about mechanics u didnt even know existed!

so dont think u have anything over me u DONT i can run many a circle around u if i wanted 2!

Thats all i have to say about that!

now back on topic!

My dad's works in your feild. I've seen stuff like this. So you're working on a dam right? He's doing some Dam or Wind thing in SA.

I'll ask him about what he's doing at SA (Hallet?) at the moment. I'm sure even you'll be impressed.

I believe you. Btw: Who do you work for?

*coff* do I smell a shitfight? poyz control ya temper... and inasnt... stop fvkkin whoring shit... and keep ya grudges off other people's threads.

If the both of you don't stop as of this post i will delete all your posts in every thread where you have argued.

Fair enough.

Thread summary.

* You can use your central locking to trigger your mirrors to fold in when the doors lock (Note: Make sure that this trigger checks to see if your key is turned to ACC or ON. Otherwise you'll be driving around with your mirrors folded in.)

* You can use an auxilary output (ie to turn your windows up on certain alarms) to fold your mirrors in

* Spare yourself all the trouble and pay someone to figure it out.

I'm using my central locking. The mirrors fold back out when I turn the key to ACC.

Ula's using his alarm. He got his alarm fitter to do it. He has to use to use the switch to fold them back out.

If the key is set to ACC or ON all that happens is the doors will lock.

Otherwise, the doors will lock and the mirrors fold in.

IMHO, this is better, it's independant from your alarm (Should your alarm die or you feel the need to get a better alarm - ie. Quicktrak).

I've got my mirror switch permanently in the fold-out position.

  • 2 weeks later...

you'd wanna connect a relay to the battery wire and the negative terminal of the mirror switch and another wire from the door lock sensor. that way when the door lock sensor is on then the mirror close gets power, and when the door lock sensor is off, then the mirror close is whatever the switch is at.

In the R32 the mirror close switch only works when there is power to the accessory system. So that's why you need to connect it straight to the wire.

Also you'd wanna put a safety in there which prevents the mirror close switch from being active while the accessory wire has power (ie you are in the car)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...