Jump to content
SAU Community

Recommended Posts

Hey guys, just interested in what sort of times most of you n/a owners out there are pulling. My bro has a r33 gts and i just think his is an absolute freak of a skyline (theres a fair bit a driver skill involved, he really knows his car), but there hasnt been a stock n/a skyline that has beaten him and its pretty common for him to knock off stockish s13,s14,15,r32,r33 etc etc. So im keen to see what times in particular stockish r33's are pulling (no nos), but anyother n/a skyline owners that would like to share that would be good reading aswell. So i'll just give you the run down on my bros car and if you can follow a simular format that would make things easy to keep track.

thanks :P

Car: R33 Skyline GTS series 1

Transmission: Manual

Mods: Cold air, catback 2.5in exhaust, lots of timing

Tyres: 245/45

Track: Kwinana Motorplex

1/4 Mile time: 14.6

60foot time: 2.0

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/179982-na-14-mile-performance/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Im finding that very very hard to believe.. 245's are also very big tyres for an NA 33 to turn.. would like to see i time slip, MPH, air temp and RA, see sig for qtr times..

Edited by NA_R33

i dont have a timeslip but i can do you one better, i've uploaded the footage onto youtube i'll put a link in the next post cause i'm waiting for it to finish "processing" as it says on youtube

The car is definately running 245 wide tyres but they barely fit on his rims, the tyre fitter told him that he shouldnt really fit them and if they pop off he wasnt to be held liable lol, thats confidence for ya

I have no doubt there are freak cars out there and have a very good understanding of how and y it occurs. My car had headers, Tune, as mush timing as it would take custom cold air... When HPI did the NA supra Vs. Skyline Article the test drivers couldnt better a 15.7, A blueprinted engine with the same mods is not going to run over a second faster, especially with heavy rims and tyres...

Does the car run these times consistantly, or was it a timing glitch?

the car has run lots of 14 seconds passes, and has run 14.6 on three seperate occasions, with the quickest being the 14.60 on the video.

Theres nothing special about this car mod wise, stock motor, ecu etc etc, the only things changed is the igntion timing, cold air and a catback.

I just think it is a freak, every now and then you run into a stock car that does things it shouldnt.

So noone else here has cracked a 14s pass on the stock n/a?

sure your brother doesnt have a GTST?

hahaha no, its a stock gts. No turbo, no nos, no nothing. You can hear it in the video, its got the n/a exhaust tone.

There was a guy in a white 33 gtst on the same night running power fc, fmic, full zorst and i think boost around 12psi on the stock turbo and the best he got on the night was a 14.6 aswell hahaha, examples of people who can and cant drive.

On a side note, my bro has no mechanical sympathy, hes the type of guy that can just belt a car all day long, years on end and nothing will break lol lucky bastard

i've been mucking around with cars for a few years now and i can definately tell you this motor is stock, no "blue printing" no reground cams no aftermarket computer it is completely STOCK besides the mods i listed. And if anyone would know, my bro who has been a mechanic for quite a while now would know.

The car pulled 123rwhp and once again youtube will verify this once it has been uploaded woooohooo ;) (you will notice abit of smoke after the pull, good old piston blow-by lol)

This was done with a blocked cat, and the cat was replaced before the drags, which would of added around another 10hp i would say

if you can get a hold of a dyno graph that would be sweet.

simply put.. 120RWHP (90ish RWKW), does not equate to a mid-14 quarter mile in a full weight r33.

there must be a reason for it... and i'd like to find out and do whatever it is for myself ;)

that seems ways to quick the best i could get was a couple of 15.4/15.5s with mine when it was na and had a few bolt on's, you sure theres no flywheel drivline tranny diff mods?? i cant believe a stock na would be able to pull that time theres got to be something to.

is the ecu been modded??

okay, i'll just give you a quick run down with the dyno run cause its not a true indicator of the real power.

That dyno is extremely harsh for power readings, when my celica had a stock turbo on it it pulled 205fwhp on that dyno and i pulled a 13.3 down the quarter which didnt really reflect its power, so i went to a different dyno and pulled 267fwhp with the same mods. Now with that in mind, when that dyno run was down the car was having trouble beating my other bros twin cam corolla, but as soon as the cat was fixed he chopped it. So i would expect around 150ish hp on a "normal" dyno.

Once again, this car is STOCK STOCK STOCK STOCK STOCK. No ecu upgrades, No cams, the motor has not been touched besides the regular oil changes and timing belt. No lighten flywheel, it has a stock clutch, with stock lsd diff, and no super dooper carbon tailshaft. My bro has owned this car for about 8 years now and bought it from a car yard that imported it direct from japan and it was completely standard (standard intake, exhaust etc).

Simple things help to get this time, like he is one very harsh driver, the gearbox crunches every gear in daily driving but he still belts the shit out of it.

Fuel light is always on when he races to help save weight, same with the spare tyre and jack etc for the same reason. Theres heaps of little things you can do to help which seems like common sense but i constantly see cars go down with a full tank of fuel and i just shake my head, thats an extra 50kg that could of easily been taken off.

The main reason i started this thread was to see what times a stock skyline should pull cause i definately know his is a freak, pure and simple, i just didnt know that he was on average a second quicker than what the benchmark is. It maybe hard to believe, but like i said before it is stock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...