Jump to content
SAU Community

Recommended Posts

G'day, it's come time to sell the GTR.

Tens of thousands have been poured into this car.

Mods as follows

$13,000 in reciepts for rebuild

Engine only has 1,500kms on it

Brand new nissan r33 gtr crank

Eagle forged rods

CP forged pistons

N1 oil and water pumps

Everything has been machined etc

Apexi power FC ecu with hand controller

3.5" stainless system

new extreme button clutch

nismo fuel reg

blitz pod filters

blits bov's (not yet installed)

It made 311awhp (232awkw) at Silverwater automotive on 14psi boost pressure

Very fast on the street.

It has white nismo gauges, nismo dash (320kmph speedo, 10,000rpm tacho)

High quality sound system

Nismo steering wheel

18" shadow rims with 255 rubber on all 4s

Bilstien adjustable suspension.

Theres probably alot i have forgotten.

One of the neatest gtrs ive seen, no dings, scratches, interior is near perfect etc etc.

Mature owner 40 years old.

Selling due to needing a family car.

This car is an awesome base for a big horsepower GTR or a very reliable street car.

The bottom end is built to hold alot of horsepower.

73d37aab.jpg

Link to comment
https://www.sau.com.au/forums/topic/180201-r32-gtr-24000-ono/
Share on other sites

wanna swap a pajero exceed 2002 and u gimmie cash?

ill give you the passanger seat and u give me 5k ontop?

iv spent too much on my car to sell it off for anything under 18k after this turbo/suspension setup

  • 1 month later...
So was that $14,000 for the one rebuild or 2 or 3?

one rebuild mate, it hasnt just had a set of rings thrown in. If you'd done something like this before you'd know its not cheap.

Have all reciepts to prove to the doubters.

Standard turbos and injectors mate. The bottom end is done, all she needs is some bigger turbos and injectors and this baby is ready for big HP.

The base line is there for a tough realiable engine. The hard work has been done.

one rebuild mate, it hasnt just had a set of rings thrown in. If you'd done something like this before you'd know its not cheap.

Have all reciepts to prove to the doubters.

Standard turbos and injectors mate. The bottom end is done, all she needs is some bigger turbos and injectors and this baby is ready for big HP.

The base line is there for a tough realiable engine. The hard work has been done.

I believe you but if im not wrong isnt this the same car that was for sale mid last year when it also had spun a bearing ? I think it would be nice for people to know the history of the car...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...