Jump to content
SAU Community

Recommended Posts

I have a non turbo R34 and want to put a turbo on it, I have been told that it is easier and cheaper to buy a whole new engine, is this true?

Sorry if this is a repost but I couldnt find what I needed in the search.....

Link to comment
https://www.sau.com.au/forums/topic/180939-what-is-cheaper-and-easier/
Share on other sites

There's a sticky up the top about converting the gts to a turbo.. And how much it roughly costs..

As for doing the engine swap that probably has more potential down the track because you don't have to take the engine apart and mess around with the compression if you want to run more boost.

im still a firm believer in upgrading other components before addressing power issues

ive heard of too many stories of people wrapping there hard earned time and money around a pole/tree because they thought for example that the stock single piston caliper front/drum rear brakes were sufficient for their 200rwkw turbocharged corolla/escort/excel/insert any run around car

i would consider first upgrading the braking department to the GT-T items first, then maybe doing the engine swap

in the case of an r34 im quite sure it will end up cheaper to turbo your current motor, as this is why 666DAN went down this track, neo motors still arnt that cheap.

yeah this is true, r33 gtst half cuts are getting pretty cheap 3-4k but you would be looking for at least 5-6k for a neo half cut, and thats if you can get it.

It would be cheaper to do a full engine swap if you had a r33, but in a r34 i would say a bolt on would be the cheapest

im still a firm believer in upgrading other components before addressing power issues

ive heard of too many stories of people wrapping there hard earned time and money around a pole/tree because they thought for example that the stock single piston caliper front/drum rear brakes were sufficient for their 200rwkw turbocharged corolla/escort/excel/insert any run around car

i would consider first upgrading the braking department to the GT-T items first, then maybe doing the engine swap

oh so true. spot on there!!! i think alot of people lose sight of this, and just want to be able to claim XXXRWKW; like it elevates them to some higher status

the tyres, brakes and suspension play such a big role in controlling the car, rather than outright power or (having a turbo).

i think a good point to note about why RB25DET motors are so cheap, is because they are nearing on 13-14 years, and even imported you are looking around 100,000km~ish for a halfcut. they almost certainly would require a freshen up or a rebuild while the motor is out to get any sort of reliably upp'ed power figures.

mmm. I can get The Late-model R34 RB25DET NEO engine, gearbox, loom and ECU etc package for $6000. But then its all got to be put in aswel. I guess ill think more about it when I have the $.

Thanks for your advice x

its not a hard job to change the motor over yourself, just have to have a bit of witt about yourself lol

i'd suggest if your getting then engine motor ecu ect i would also get the turbo fuel pump too for like 50-100 its a good idea because the stock ecu is tunned with that fuel pump so it might throw it off having a smaller pump, bit of extra secruity is always good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...