Jump to content
SAU Community

Recommended Posts

Ok here is the story & YES i have read all the threads i could find on topic

I have a 97 s2 Gts-T

Mods are:

8.5psi (Turbotech)

R34SMIC

Pod

EVERYTHING else including exhaust is std

When i got car always had a slight pop on idle but never missed through rev range....anyway as i had changed g/box & diff oils, all filters etc since i go car i though id change the plugs as god knows how long they had been in there...got a set of iridiums heat range 6 (originals were 5) & threw them in...straight away it started to hesitate/miss at 4500-5000rpm so i did some research on here & regapped to 0.8mm & it made a hug difference but miss was still there on idle & in cold it would hesitate occasionally but i lived with it...then it started getting worse so i thought time for splitfires

whacked them in & presto miss gone on idle & no hestitation...but first time i drove it in colder weather at night its back???

Then I noticed when i give it a good kaning it tends to go away (as it does in the warmer weather) so im starting to think maybe going from a heat range 6 plug from 5 might be the whole problem as it seems when its cold they do not fire properly but when its warmer or after i drive it hard it seems to be fine

Maybe i should go back to a heat range 5 & my car is not modded enough to benefit from a heat range 6 plug & infact running worse

Any thoughts as im stumped?

Link to comment
https://www.sau.com.au/forums/topic/180944-misfireplugscoilpacks/
Share on other sites

you have said that they are 0.8mm gap but how old are the plugs? and what sort are they?

you shouldn't have to run the smaller gap with splitfires.

i would also suggest not running too much boost with the stock exhaust. it is a bit restrictive and will keep more heat in the turbo.

the reason why it goes away if you fang it is that the plugs are fouling. your o2 sensor may be a bit stuffed and causing you to run rich at low load which is fouling the plugs. then when you fang it the plugs are cleaning themselves.

you have said that they are 0.8mm gap but how old are the plugs? and what sort are they?

NGK Iridiums & they are only 3months old

you shouldn't have to run the smaller gap with splitfires.

thats what i though hence why i am stumped

i would also suggest not running too much boost with the stock exhaust. it is a bit restrictive and will keep more heat in the turbo.

yea thats why im at 8.5psi & not 10-12psi

the reason why it goes away if you fang it is that the plugs are fouling. your o2 sensor may be a bit stuffed and causing you to run rich at low load which is fouling the plugs. then when you fang it the plugs are cleaning themselves.

but i get my usual km out of a tank? if o2 sensor was stuffed wouldn't that affect my kms per tank?

not if it was stuffed when you got the car. the hotter plugs you were running got to their self clean temp easier so they could burn the extra fuel easier.

and how many kms old are the plugs? not age sorry.

pull them out and have a look and have a look and see if they are fouled up (all black and sooty). if they are then it is running rich and it would be worth testing your o2 sensor.

not if it was stuffed when you got the car. the hotter plugs you were running got to their self clean temp easier so they could burn the extra fuel easier.

and how many kms old are the plugs? not age sorry.

pull them out and have a look and have a look and see if they are fouled up (all black and sooty). if they are then it is running rich and it would be worth testing your o2 sensor.

ahh i see & does make sense

plugs done about 2000-3000k max

I heard o2 sensor should be changed at 60,000 anyhow? that true? if so im due for one as i just have passed 70,000

regardless i should change plugs yea?

THANKS

try changing the plugs to a set of copper ones (bcpr6es) and see if that makes a difference (they are only about $4 a plug, so won't break the bank). it also depends on if the o2 sensor was even changed when it was supposed to.

try disconnecting it and see if alters your fuel economy.

try changing the plugs to a set of copper ones (bcpr6es) and see if that makes a difference (they are only about $4 a plug, so won't break the bank). it also depends on if the o2 sensor was even changed when it was supposed to.

try disconnecting it and see if alters your fuel economy.

cheers

what gap? the std 1.05mm or gap down to 0.8mm?

Ok i think i may have gotten wrong iridiums originally & when i re-gapped i think i might have damaged the tips so i have a new set on the way which are already 0.8mm & i also have a new NTK o2 sensor on the way as it prob has never been changed (Thanks Kudos Motorsport) so will throw in new sensor & plugs when i receive & hopefully problem is solved....

if not i wont know what the hell it as i would have changed coilpacks, plugs, o2 sensor & would only really leave AFM or CAS in the equation

  • 1 month later...

I was talking to a mechanic the other day, and he said you are better with "Normal" plugs.

We were discussing a similar problem with my drive at the time.

His opinion was that the Platinum ones, once they get a kicking, dont seem to recover, and need changing again... !!!

Makes me wonder why I am using them. at the price they are?!?

Now I am confused?!?!...., I thought they were the dogs goodies, but now...

Anyone else know better, and can substanciate it?, 'cos I'd love to know which way to go.!

BTW, the flat spot on mine is at 5500 RPM. @14, 18 & 22 PSI (not using any more than 14PSI at the moment BTW!)... Kinda wrecked the 24PSI attempt for me that day!!

Mr Dyno said it was the coils, but I noticed a noisy Fuel Pump on Sunday eve, and someone said if it had been run dry, then it could have been damaged(it's about 250Km old now).

My thoughts are, if it was noisy, and a wavering noise was coming from it, there could be a problem, but the Dyno never picked up a lean situation, or any fuelling problem.

I am going to try the ones that Just Jap sell... the ones with 10% extra voltage. Seem a better price, and offer more spark too, I'll update when done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...