Jump to content
SAU Community

Recommended Posts

There are many different incarnations of the TD06 20G. There is a TD06-20G, TD06H-20G, TD06N-20G, TD06S-20G, TD06L-20G and TD06L2-20G. Then there are the optional turbine housing sizes as well. There are 8cm, 10cm, and 17cm housings available for the 20G based compressors. So there are 6 different turbine wheel options to mate to the 20G compressor plus the 3 housing options. There are also compressor housing options but the 20G wheel performs about the same in all of them, even the little TD05 based housing.

There are also different versions of the 25G (T67) although not as many. TD06H-25G, TD07-25G and TD07S-25G. I think there is one more but I'm not sure of the name. Turbine housing options for the 25G are as follows. 8cm, 10cm, 17cm and 22cm. So 3 or 4 turbine wheel choices and 4 housing choices. The 25G is available with a 4 inch inlet or 3 inch inlet on hte cover.

Some of these may not apply to your application but maybe helpful for the archives or just in general.

jeff

Ok... here's some pics and some more info. its a TD06H-20G. On the compressor wheel its got the trust part number: 49179-52010 which is different to the part number on the trust blue plate (49179-01190) It also has 0/8 and H9 written on it. The exhaust housing has a Q then DUCM then 2 then 6G also 7 9-14400. Dunno if this means anything... any more idea's of HP and spoolup time?

Originally posted by sidewaymambo

Bloodline..my TD06-25G (T67) has 16cm turbine housing ..

Ahh.. another choice that I wasnt even aware of. Thanks for pointing that out.

Now on to the turbo itself. I cant say with any certainty at what rpm the turbo will spool on your application as I am not familiar with the performance of that turbine housing. I will say that the TD06H-20G in an 8cm turbine housing is capable of 450+whp at its limit on a 2.0L engine. I have made right at 400whp on the smaller TD05H-20G 7cm on a 2.0L. The 20G compressor is rated at approximately 44lbs/min depending on who you ask.

Now to the turbine wheel. The TD06H turbine mated to a larger compressor can deal with power levels nearing 550whp. I have seen a 2.0 dyno 611whp on a 75 shot using a TD06H turbine wheel in a 7cm housing.

I know that this is not a direct answer to your question, but hopefully it will provide some insight to what you can expect out of the turbo.

jeff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...