Jump to content
SAU Community

Recommended Posts

Hi all, I'm looking at buying some t10 parker globes for my 1997 skyline, since one of them have blown. I'm interested in this blue Monza brand from ebay http://cgi.ebay.com.au/MONZA-T10-PARKER-LE...1QQcmdZViewItem I have the Philips Diamond vision headlights, which color should I go for the parkers? blue or white. Also, are the blue ones legal? I don't wanna get pulled over by the cops for illegal blue parkers

Link to comment
https://www.sau.com.au/forums/topic/181277-are-blue-parker-globes-legal/
Share on other sites

Just go for the white LED's mate. Those blue parkers don't belong on a Skyline in my opinion. Also be careful with those 4,5,6 etc LED ones. They might not fit into your hole (parker light hole).

yeah man :( those are exactly the ones I mean :)

I've got them in my: side markers, side indicators and park lights

and some bayonet style in my: normal indicators, rear indicators and brake lights

They run at an extremely low wattage, think its 0.5w per brake bulb, even less for the indicator bulbs,

And apart from the fact I need to wire in some resistors, because my indicators think i've blown a fuse and flash like 5 times a second, they look mint :D

You can also just leave your park/rear brake lights on overnight or for a few days, which is helpful if you ever need to park it on a street and they battery won't run out :D

You can also just leave your park/rear brake lights on overnight or for a few days, which is helpful if you ever need to park it on a street and they battery won't run out :P

I was just wondering why you would want to do that? Is it so that on coming cars can see that your car is there or?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...