Jump to content
SAU Community

Recommended Posts

CAR DETAILS:

1994 R33 series 1 gts-t

Power Mods:

hi-fow turbo (from AVO and has been freshly rebuilt to handle 20psi in July07) Cost $1800 + reconditioning

Microtech LTS-12 ECU & hand controller Cost $1800

Nippon Denso hi vloume fuel pump Cost $300

840cc Nismo injectors Cost $1400

Blitz SUS pod filter Cost $250

HKS FMIC & piping Cost $1800

GTR BOV Cost $100

Blitz d-EBC (dual electronic boost controller) $cost $600

HKS Iridium spark plugs Cost $160

Grex oil cooler Cost $1000

morroso catch can (not in pic of engine bay but since installed) $cost $200

Gates racing timing belt (installed at 87,000kms with new idler & tensioner pulleys & bolts) Cost $200

tomei adjustable exhaust cam gear Cost $160

full earthing kit Cost $50

nismo radiator cap Cost $80

HKS stainless dump pipe Cost $350

Blitz 80mm stainless front pipe Cost $350

X-Force 3"stainless cat Cost $220

Blitz NUR Spec-R 80mm cat back exhaust (with bolt in silencer) Cost $1100

Jim Berry (RACE CLUTCH)brass button clutch, one very tuff clutch!!! has 3400kg clamp pressure (installed 12months ago....less than 6000kms) Cost $1200

Handling Mods:

Front & rear Cusco strut braces Cost $350

Tein HA adj coilovers (height and 24step dampen adjustable) Cost $2800

Nismo 2-way LSD Cost $1800

HICAS removal bar Cost $150

Bridgestone 235/45/r17 front tyres BFGoodrich 255/40/r17 rear tyres Cost $1400

BBS 17x8 front an 17x9 Rear 2 piece forged rims were on car but was quoted $1700 per rim to replace but they're no longer made.

Bendix ultimate brake pads Cost $250

Slotted DBA rear rotors Cost $260

Braided brake lines Cost $500

Looks:

Genuine series 3 N1 GTR front bar Cost $1500

GTR grill Cost $200

400R skirts Cost $200

Veilside rear bar Cost $560

D-wing Cost $300

Nismo clear indicators in GTR bar aswell as side front 1/4 panels Cost $300

"skyline" shaved from the rear part between the indicators Cost $150

tinted windows (darkest legal) Cost $450

Interior:

Sports steering wheel / HKB boss kit Cost $280

Blitz guages(3 - water temp/oil temp/boost) Cost $300

Nismo 300km/h dash Cost $800

Blitz multispeed turbo timer Cost $260

Rockford forsgate head unit Cost $400

Earthquake 6" splits front $Cost 230

series 2 drivers & passanger seats

thats $22,300 worth of parts ALONE!!!! NOT INCLUDING the wheels, or labour for fitting, or painting, or the time spent on dyno tuneing

my loss, your gain :)

Power:

Dyno sheet for 259kw (at 17psi)

ET:

Best so far is 12.8 on street tyres at Heathcote on a 30+ degree day (only been to the strip twice)

$17,000 (open to offers)

With Rego till August 08 and a RWC

Has 90,000kms on it (48,000 km when I bought it in 2001).

This car has been maticulously maintained since the day I bought it in 2001, I was the first owner of it here in Oz, oil & oil filter changed every 6 months regardless of kms, all fluids have been changed within the last 12months. Timing belt/tensioner&idler pulleys bolts changed only a few months ago. New windscreen in Feburary. Hi-flow turbo just been freshly rebuilt in July

Any other questions please dont hesitate to ask, I'm sure ive forgotten something.....and happy to answer any queries

Located in Geelong, Victoria. Can bring car to Melbourne for serious buyer

Cheers

Berin

[email protected]

0417 546 384

enginebay.jpg

timingbelt.jpg

camgear.jpg

oilcooler.jpg

cluster.jpg

consile.jpg

wheel.jpg

post-7879-1196318128_thumb.jpg

post-7879-1196318219_thumb.jpg

Hi Berin,

The car looks really neat and tidy. Just a few technical questions about the car. How many kays did the car do on the old speedometer? How many kays has the standard motor been running 260kw? Does the new "gates" timing belt give the engine any more power over a nissan belt? The turbo can run 20psi has the standard engine been modified to suit the extra boost? In your signature picture the car looks to be involved in some sort of motorsport. How often do you do this?

Sorry for all the questions but there are so many stock cars out there with questionable service history that have been clocked in Japan and then live most of there life boosted to the edge of the limits of the standard engine.

Thanks

Tracey

Thanks for your detailed reply Berin,

I am a bit of a newby with forums and my boyfriend is about as sharp as a nuns nasty. I will run this info by my Dad "He works for Perkins Racing" and will get back to you if I am interested in making an offer.

Thanks again

Tracey

Reply

"Hi Tracey, I'm happy to answer any questions you might have,

1: when the new speedo was installed it was set to the same reading as the old one that was removed.

2: Its been running 260kw now for about 8 months an is still performing strong, its going in for a "check up" dyno tune on Monday, I do that every 6 months just to make sure everything is running the way it should.

3: The gates belt offers no power benifit but is 3 times stronger than a standard belt so it can withstand the output of the motor easily

4: The turbo can run 20psi, but I have not run it at that as it is a standard engine. 18psi is ok on the stock RB25's an 20psi would probably be ok, but im never one to push those limits. The power figures are made at 18psi and it performs strongly at this boost, but I mainly drive it set at 9psi. even at 9psi the car makes over 200kw

5: I've used it for 2 motokana days (where your lucky to get out of second gear an each run is shorter than 2 minutes) an even then it was on 9psi, because of the low speed nature of it theres no point in usung high boost settings. The car was always up to good operating temperature (oil & water) before I ever put it through any sort of event or dyno runs. Im very particular about my car an how I treat it, this is why it has been a constant strong performer with little to no faults ever happening to the car.

hope this has cleared a few things up for you, if you have any further questions, please dont hesitate to ask

Cheers

Berin"

your welcome tracey, If your dad has any other questions on his mind, or you for that matter, my mobile numbers there, give me a call an i'll answer everything as best I can, I can even put him onto they guy (Chris Dalton of Daltons Automotive) who has personally tuned an looked after the car for me for many years.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...