Jump to content
SAU Community

Recommended Posts

im having trouble with getting the waterpump off!

there is a cover at the bottom of the block that protect the timing belt pulleys, but for life of me i cant get it off, the screws are off but its getting stuck or something.

the only other way for me to get to it is to take off the timing belt ( which im not comfortable doing), then take off the pulleys to give a clear shot at it all.

if anyone has done this themselves in the past and has any bits of advice or even better could come spend a few hours with me and lend a hand.

all help is much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/181932-need-help-with-waterpump/
Share on other sites

Mate i would replace the belt at the same time as the pump.

I think you have to take it off anyway to do the pump..

Thats why most people would change the water pump when they do there timing belt..

Cheers....

Mate i would replace the belt at the same time as the pump.

I think you have to take it off anyway to do the pump..

Thats why most people would change the water pump when they do there timing belt..

Cheers....

timing belt has already been done but the waterpump didnt get changed.

cheers for info

I have a pulley puller, 27mm socket and breaker bar you can borrow if you want Mikey, just did all this on mine but it wasn't me that attempted it!!

cheers steve but yeah a little outta my league!,

new offer! :sorcerer:

desperatley need car for SUNDAY and no garages can get it in till early next week,

can someone from here preferably mechanic ( huhum Dave just cause your close) that could come give a hand,

payment = 2 cases of beer ( of their choice),

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...