Jump to content
SAU Community

Recommended Posts

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

So value wise we're talking around $15K for a nice looking low 13s car.

I suppose that's pretty good value right?

Can anyone think of better bang for your buck?

I think a stockish supra will run a 13s 1/4 but you're looking at what $20K for a decent one.

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.

Hmmm so for interests sake, what else could you get/mod for $15K that would do those times?

RX7, Soarer, maybe Galant VR4...?

If you just want a car to run low 13's / high 12's then you can spend less on another make for $15k. You just don't get the overall package that a skyline offers.
ive managed 0 to 100 in 4.88 with good 255s and usual mods 172rwkw

You suck !

I managed 5.08 or something like that on the rev/speed/metre with 194rwkws.

wanted badly to crack the 5.00 but couldn't do it.

Now on 239rwkws, tried again.....time for a new clutch ! Haha :)

Sheeeeeet, good work though.

Just bought a 32 gtr with 250kw....i can change between 4wd/2wd so what will be quicker down the qtr mile???

Considering the GTR decides when 4/2wd is needed, i thought's be best to leave 4wd for sure!

So for take off it will be 4wd, then it will be 2wd drive later on anyway, decided by the car, not you. :)

ran my car at jambo, only had 2 runs, best being 12.8 @ 112. with 1.9 60ft

i cant see how im gona reach 116 mph? and 11s? if i get my 60fts down to say 1.7, is the rest just in quick gear changing?

also 2rismo if your still there, wat tyre presure do u recomend on et streets? and do they like big skids? also what did u find best revs to launch at?

i wana push my car to the best it will do, i no practice makes perfect but a little advise will help:)

What other mods?

An R33 with fuel pump, cooler, turbo back exhaust, button clutch and standard ECU making 205rwkw ran a 13.1 on street tires.

LTHLRB I think where his plates.

Depends on the driver, depends on your tires etc..

There are a million different variables that could effect that time.

Yep thats me :)

the mods were

Turbo back exhaust, GTR cooler, Turbosmart boost controller, Apexi pod, STOCK ENGINE MANAGMENT SYSTEM AND INJECTORS AND AFM, Tomeii fuel pump, Exedy clutch, $50 tyres i baught 2nd hand from a tyre joint to pass rwc, a very good driver, Tein suspension (drift suspension, So stiff ass end)

Any questions about me making 205rwkw just ask away :) its possible to make 200kw on stock ecu.. i have done it before

Car also went 1.9 60 footer and 105mph

Link here

Edited by LTHLRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...