Jump to content
SAU Community

Recommended Posts

for sale

emanage blue with loom to suit series 1 r33 gts-t, also comes with the software, cable etc

never fitted, not needed anymore. plugs straight in

looking for 500ono

Matt 0422976559

Edited by mattgtst33
Link to comment
https://www.sau.com.au/forums/topic/182182-emanage-blue-with-software/
Share on other sites

too low sorry, PRICE DROP now $650 ono, adelaide preferably. cmon offers.... reasonable ones

will u take 250 ? they are going cheap these days 700 is almost the price of an ultiamte sorry.

im keen

apexi power FC's are going for $600-$800 these days which turns out better then an emanage so it will be a little hard to sell so expect offeres below what your looking for.

will offer $300 including postage

WTF? powerfcs are going for well over a grand

goodluck with the sale mate

Only for people who dont shop around

You can get then here on the forums delivered to your door for $965

So second hand 6/700

Only for people who dont shop around

You can get then here on the forums delivered to your door for $965

So second hand 6/700

true true

is there any difference in the loom between a series 1 and 2???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...