Jump to content
SAU Community

Recommended Posts

Hey,

Im about to buy a 1996 Skyline GTS25 N/A. My plans are to do mostly body work and stero for the first year or so, mainly because this is my first car and im not really after alot of power yet. However im sure one day i will want to turbo it, Is it hard to bolt on a turbo and be able to produce a good amount of power, eg. TO be able to beat the gtst, how much do you think a bolt on job would be. Also how much does the GTS25 1996 Skyline produce stock (kw), And please say they can woop the nissan pulsar sss's and lancers.

Cheers!.

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/
Share on other sites

its not worth turbocharging an NA unless you really love the car. if in future you want a turbo, its better to buy a factory turbo, too many problems and costs arise from turbcharging an NA skyline. And you have to be joking about beating sss and lancers, they dont even compare

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/#findComment-380718
Share on other sites

well, first off, with a honda engine like the b16a

u need to launch good, then redline each gear, change gears well just so the engine stays in its power band, the agressive cam, vtec zone.

if this happens u are in a run for your money, but if u drive equally as well, u should be ahead.

if the b16a cant drive, well, its not much of a contest

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/#findComment-383097
Share on other sites

Haha yeah my car beat a b16a CRX, i have a fairly heavy stereo system and had another passenger. Only engine mods i have is a HKS Super Drager Exaust seems to go good enough for me. I personally think the NA Skylines perform particularly well from 100k's upwards. like accelaration from 100kph is really good. Neone agree??

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/#findComment-395348
Share on other sites

Mine gets from 100-160 very nicely, with out effort infact, i am keen to put some more power into the car though, xtractors etc, any one considered adjustable cam gears, its about 500 a set for the hks items, any thoughts.......oh BTW N/A skyline makes for a very good first car.

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/#findComment-403261
Share on other sites

cheers, it was my second car i bought and did up a vl when i was about 16, made double what i payed for it, and then had enough for my car, yeah exactly what do the adjustable cam gears alow cause i though there was no point without aftermarket cams?? as the lift and duration would already be at the optimum with the factory cams/settings??

Link to comment
https://www.sau.com.au/forums/topic/18224-becomming-a-t/#findComment-403274
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...