Jump to content
SAU Community

Recommended Posts

ok im moving house soon and dont wana have to take all the contents of my garage with me so im cleaning up the contents.

i have:

-1x12" pioneer subwoffer

-1xcomplete electrical front lip for 33 4door including motors

-1xstock side mount intercooler for a 33

-1xnew front mount intercooler for a 32,33,34 never been fitted

-1xcannon exhaust never been fitted

-various amounts of 2 1/2" mild steel exhaust piping with 45'+90' bends and straight runs.

pics and info:

1. 12" Pioneer TS-W306C

1000w max / 400 nom.

83oz duel mass magnet

looking for around $100, had it in my car for a while but went for 2 12"s and paid less than i paid for this one.

2. Dunno what the front lip is worth really, or the motors, all running gear will take $50

3. Take $50 also for the smic but hurry cos my brother in law wants it for his mazda 3 turbo project lol

4. new fmic comes in a kit that retails over $600, its a monza cooler(600x300x76) and has never been fitted take $200

5. Sal wants the cannon on her car so ill only take $100 paid $50 more than that.

6. Exhaust pipes would be handy if u were doing a cat back system cos i have enough piping to do the whole job in 2 1/2" mild steel.

would use it for sals exhaust and do it straight thru but its too big for a 4 cyclinder.

if u need details reply to post or if ur keen on an item pm me

obviously id prefer pick up on all items, if u want it another way u can sort it out.

im happy to add $10 for fuel and deliver it to ur house in brissie or on the coast or would be happier to meet

at an agreed location.

any other queries call 0432035873, if i dont ans send a message cos ill prob be at work and ill get back to u.

Darren

ALSO WANT TO SAY I AM LOOKING FOR A SET OF COILOVERS OR LOWERED SUSPENSION KIT (PREF NEWISH)

POST UP UR PRICE, OR ITEM/S TO SWAP FOR IT.

post-34246-1193731460_thumb.jpg

post-34246-1193731467_thumb.jpg

post-34246-1193731474_thumb.jpg

post-34246-1193731480_thumb.jpg

post-34246-1193731486_thumb.jpg

post-34246-1193731497_thumb.jpg

post-34246-1193731503_thumb.jpg

post-34246-1193731514_thumb.jpg

post-34246-1193731523_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/182991-garage-sale-stockaftermarket-gear/
Share on other sites

  • 2 months later...

its from a series one, its stock and basically in the dash there are buttons that lower it down and raise it up so on the highway u can lower it down and goin slow over bumps u can raise it, its for more downforce apparently, its automatic too i think, like the doors wen u go ova 20ks the doors lock, if u go over a cirtain speed this thing drops down, basically this will suit someone with one on it already but the motors are shot or the bar is cracked or sumthing, too much wiring otherwise, stock the motors just click into the harness coming off the headlight harness.

got all the bolts and brackets too btw.

does the fmic come with the piping to install it?

no, the exhaust pipe im selling was the piping i had used on my old cooler and i did it the easy wat thru the existing holes but it was pissing me off so i decided to get a proper piping kit but i couldnt buy pipes on ther own so i bought a kit with intercooler included and thats y its for sale i didnt need it just the pipes that came with it.

pm replied too.

  • 4 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...