Jump to content
SAU Community

Recommended Posts

mine flutters, not a quick reversion flutter, a spaced out one. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

Edited by QWK32
mine flutters. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

ohhh! learn something new everyday ;) i stand corrected :)

mine flutters, not a quick reversion flutter, a spaced out one. and if i look up the end of it and pull in the accelerator cable to to the turbo spooling the bov still opens, and thats only on like 1 psi. i though that it wasn't opening properly at first but it is. its got something to do with the dual action its got. if you quickly close the throttle it just dumps it fast but if your working the pedal and slowly letting it off it will flutter.

yeah got the apexi bov, fast flutters at low rpm changes but once ive built a nice amount of boost, its just full vent pssshhh >.<, if only it wouldnt stall, like one time it stalled at the p plater in the car next to me said to his mates, look he stalled it, i didnt want to go into how skylines and afm and bov = stalling probs :S

guys how do you guys burn your tyres like that? without take off the road. as he is burning his tyre in position without move..

how can you do that? with manual!

thanks

LOL he is pushed up against an invisible wall man it's all magic tricks..

guys how do you guys burn your tyres like that? without take off the road. as he is burning his tyre in position without move..

how can you do that? with manual!

thanks

heel and toe, clutch to 2nd gear, release clutch, change left foot from clutch to brake; presto!

heel and toe, clutch to 2nd gear, release clutch, change left foot from clutch to brake; presto!

AKA Line-Lockie, my brother used to do them in his VN V8 in our driveway.

Thats a sic vid, what's on the road at the end?

OT Get an aftermarket plumb-back.

Edited by 90GT4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...