Engine Swap?

[R31nismonightmare]

hey peeps, whats involved in putting a manual rb25det neo into a r33gts-t s1?

[The Dan]

hey peeps, whats involved in putting a manual rb25det neo into a r33gts-t s1?

Spanners: 10mm, 12mm, 13mm, 14mm, 17mm, 19mm.

You will also need pliers, #2 and #3 screwdrivers, and a decent socket set with extensions.

Use spanners, pliers, screwdrivers and sockets to remove engine. Put new engine in place and use spanners, pliers, screwdrivers and sockets to put it back together again.

Change ECU and loom and re-route some vac hoses.

Same mounts, same mounting position, all gearbox's are interchangeable.

EASY!

[abu]

Spanners: 10mm, 12mm, 13mm, 14mm, 17mm, 19mm.

You will also need pliers, #2 and #3 screwdrivers, and a decent socket set with extensions.

Use spanners, pliers, screwdrivers and sockets to remove engine. Put new engine in place and use spanners, pliers, screwdrivers and sockets to put it back together again.

Change ECU and loom and re-route some vac hoses.

Same mounts, same mounting position, all gearbox's are interchangeable.

EASY!

Ring spanners or is open end ok?

I prefer to use ratchet spanners my self, but I guess it depends on the individual.

Edited September 1, 2007 by abu

[The Dan]

Ring spanners or is open end ok?

I prefer to use ratchet spanners my self, but I guess it depends on the individual.

Long double ring or gooseneck double ring are the better choice. The ratchet rings are good but only fit on 50% of the bolts due to a bulky head.

Stay away from open end unless you are using a Snap-on flankdrive.

[R31nismonightmare]

lol thanks for the advice.

What is involved loom wise? with all the dash elecs etc