Jump to content
SAU Community

R32 Rb25de Head, Q45 Afm, Blitz Turbo Timer, R33 Gtr Parts, Apexi Suspension, Updated 21/1/08 Prices Dropped!


Recommended Posts

Hey all,

Got a lot of stuff I need to clear from the garage, I need room to work on my project! I’m open to reasonable offers on all parts..

R32 parts:

RB25DE head from a r33, . I am chasing $500 for it. Reasonable offers will be considered. Due to the weight freight will be expensive but I’m willing to arrange it at the buyers expense. Also have a RB30 S1 block for sale.

R33 Gtst Parts

Q45 afm 90mm as new condition $250

Rear seats complete (2 pieces) $80

Rear bar $40

Rear Tail lights, $80 each includes surrounds.

Power Window Switch Drivers side with surround $120 Series two only

Power window switch surround only $40

Drivers window side glass $80

R33 GTS-4 parts

Ignition barrel with rack and genuine Nissan key and all surrounds $200

6x rb25 coil packs with wiring loom and bridge from r33 series 1 $220

Boot lid black no spoiler r33 gts-4 coupe has sound deadening $120

RS-r springs for suspension $140

17 inch Chrome wheels almost new tyres suit 4 stud Nissan. Rears have good rubber fronts are worn. $400

R33 gts-4 rb25de manual gearbox 5 speed twin syncro, looks like the rb25det box with 4wd rear output shaft like a GTR box $400

R33 rear cradle does not have hicas from factory no extra weight of hicas or lock out bars, has better geometry for traction upgrade for 300zx or weight reduction for r33

this is for a bare cradle $200

R33 Vspec GTR Parts:

HKS camshafts in/ex 280 degree 10.2 lift were installed never used $700

Drivers door trim blue insert $50.00,

White exterior Power mirror $60

Standard rb26 twin turbo pipes from cooler to turbo $300 set

Apexi N1 rear coil overs $400, fitted for 40,000kms. no leaks or damage

Blitz full auto turbo timer $120

90mm high flowing cat $150

Nissan S13 Silvia parts

S13 silvia 3 inch catback exhaust VEILSIDE best sounding zorst and rare jasma plated has 2 dents can't be seen on car $440 ono

Misc Parts:

RB30 s1 block crankshaft head will sell cheap

bridgstone turanza er30 tyres x 4 205/55/r16.....6mm tread left on two 7mm on the other two cheap $ 80

Im open to reasonable offers. Need all this stuff gone ASAP I need the space to work on my car! All items are located in Sydneys west. Happy to post the small stuff and can arrange local delivery for a small fee.

Also got a 180sx for sale.. has a bit of damage PM me if interested

Cheers,

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Can i grab the spoiler without bootlid, $350 (unless the boot will fit an S2 R33 GTST)

  • 2 weeks later...

that is not just your awd controller.. its also got your active diff controller... the unit on top >;P

fyi

  • 2 weeks later...
collin- will not fit an r33 gtst there will be issues with the floor pan.

mad gt4 - it was running in the gtr before it was removed.. and pm sent

The GTR box will fit in a RWD skyline just need a bit of modifying! Ive got a GTR box in a RWD 32. need custom tailshaft, customize the transfercase, modify the mounts in some cases. Spewing bout the box I would have grabbed it if it was for sale bout a month ago. just replaced my one and the new box I got aint nothing special either :D

The GTR box will fit in a RWD skyline just need a bit of modifying! Ive got a GTR box in a RWD 32. need custom tailshaft, customize the transfercase, modify the mounts in some cases. Spewing bout the box I would have grabbed it if it was for sale bout a month ago. just replaced my one and the new box I got aint nothing special either :D

thanks for the info mate.. much appeciated.

the box is much cheaper then a r33 gtst box. its of no use to me as I will be using my existing box for the rb26 conversion..

HI, would you happen to have the under bonnet carpet and the rear side bumper pods?

Sorry mate dont have either of them.. Bonnet lining will go with bonnet.

Hey mate,

How much for the steering wheel on its own? I dont need the other stuff.

Its out of a R33 Series two V Spec, cluster had 80,000 clicks on it. box spins freely, had little to no metal flakes in the oil when drained..

Cheers,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...