Jump to content
SAU Community

Recommended Posts

Ok

well this noise has been there since the day I picked up my car which should be going into its 3rd month now and the car was bought of a former forum member who told me everything about the car so I was happy with it and still am.

BUT

I have heard skylines go flying past me at full WOOT and the noise my turbo makes is no where near to what theirs makes.

I get a really scratchy, whiney supercharger kinda noise and I don't think im losing any boost coz my boost gauge (after market Apexi gauge) on full throttle is reading just over 0.5bar which I take it is around 8psi.

The only mods are a pod filter and cat back exhaust.

The noise only starts when it's past 4500 or when the second stage boost kicks in and boosts to 7-8psi.

Now I also have searched through the forums and have read to check for leaks in cooler and intake piping. But also read some where the could be leaking gasket.

If it's the gasket would the exhaust note sound a shit load louder also? Car sounds normal for a RB25DET with 3" from the cat.

Any ideas?

Would shaft play cause a noise like this? Im not getting ticking, clunking, rubbing noises just a really high pitch scratchy supercharger kinda noise.

Your help will be greatly appreciated

Thanks

Ash

Can you describe the noise?

my car made a real screaming noise when i boosted it and it turned out to be a leaking exhaust manifold gasket aswell as turbo inlet gasket.

If thats the case it wont cost much to repair.

If its a leaking gasket you can try this;

Good trick to test a leaking gasket is to get a thick cloth or rag.

Start the car and let it idle, then get someone to hold the cloth/rag over the exahaust, blocking it completely for a few seconds while someone sticks there head in the engine bay on the turbo side and listens for any exhaust leaks!

What it does it builds up the pressure in the exhaust, and it leaks out from the weakest point (gasket leak).

Try that, if you have trouble man, I will check it for you on the weekend when I pick up the wheels.

My cousins a mechanic also so I will get him to look at it also for a 2nd opinion, as he will be with me more than likely.

Edited by abu
Can you describe the noise?

my car made a real screaming noise when i boosted it and it turned out to be a leaking exhaust manifold gasket aswell as turbo inlet gasket.

If thats the case it wont cost much to repair.

exactly what you said. it comes on as a normall spool noise then screams like a mofo. duno if you have heard a supercharger before but sounds like a scratchy charger.

god i hope its only those gaskets.

any idea on cost?

If its a leaking gasket you can try this;

Good trick to test a leaking gasket is to get a thick cloth or rag.

Start the car and let it idle, then get someone to hold the cloth/rag over the exahaust, blocking it completely for a few seconds while someone sticks there head in the engine bay on the turbo side and listens for any exhaust leaks!

What it does it builds up the pressure in the exhaust, and it leaks out from the weakest point (gasket leak).

Try that, if you have trouble man, I will check it for you on the weekend when I pick up the wheels.

My cousins a mechanic also so I will get him to look at it also for a 2nd opinion, as he will be with me more than likely.

dude if you will be able tog et that done that will be ace. i can bring the wheels to you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't like "actual computers" for in car use. They take time to boot up, have OS annoyances, and so on. Arduinos etc are ready to go a few seconds after power on, don't mind being agressively powere cycled, because everything is non-volatile, don't mind being shaken and stirred.
    • As Fred would tell us, it's all about interpreting the rules. It's not a water sprayer, it's a water mister... But everything else you've said, 100%! Even a raspberry Pi would be great, use HDMI out for a display, and add a raspberry Pi CANBus hat to read values out from the ECU.
    • Being a race car, and being in the era of the Arduino, one would think it would take little effort to build a controller to do the spraying based on a real physical measurment. Waaaaay back in the dim dark AS days, JE "designed" (as in, he had help) a microcontroller based intercooler spray system. It watched the difference between a temp sensor stuck on the core and one in the free air in front of the cooler, and if the temperature difference exceeded a (settable) threshold, it would activate the sprays. Thus, it only ran water when there was an actual need for water. If you stop to think about the actual physical things that are going on in that stack of coolers, there's probably at least a couple of triggering conditions one could come up with, and one could probably even run one pump with more than one solenoid valve, to allow water to be placed where it is needed, or at all points at once (if it is needed at all points). We're in the age of science baby. But.... I suspect that intercooler water sprays are on the forbidden list in most circuit classes, no? So only good for Targa type stuff?
    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
×
×
  • Create New...