Jump to content
SAU Community

Recommended Posts

I have owned the car for almost 2.5 years. I am the first owner in Australia. Imported the car through imports101. The car landed in April 2005 and was complienced by Carizma. This car has always been very reliable, and the only problem i ever had was with the original RB20DET engine, which dropped a cylinder. At the time i was quite annoyed, but it gave me a reason to put in an RB25DET!

All the necessary engine conversion work was done by Roshan at Driftline Racing. No corners were cut, and i ensured everything was done as well as it could have been.

I have attended 3 track days in the car and it has been great to me at all of them... only problem it had was needing MORE TYRES!

The Rear seats, Carpet and sound deadening have been removed and the entire floor has been painted matt black. This was done in May this year. At the same time, I had the majority of the car Re Sprayed to freshen it up when i put the Type-m kit on.

The Engine and gearbox came out of a R33 Series 2 GTS-t front cut.

Kilometres: 65,000 (Engine swap was done at 49,000)

Complianced: Yes

Registered: Yes, Until April 28th 2008

Transmission: 5 speed Manual

Engine: 6 cylinder RB25DET Turbo 2.5L

Modifications:

RB25DET Engine Swap

RB25DET Gear Box

Brand new Exedy Heavy Duty Clutch

Custom R32/R33 Tailshaft

Cusco Adjustable Castor Rods

Cusco Front and Rear Sway Bars

Cusco Front and Rear Strut Braces

Greddy Intercooler and Piping

Power FC with Hand Controller

Bride Brix II Seat

Tuned By Dr Drift

Nismo 2 Way LSD

Vertex Front Bar

Type-m Side skirts and rear bar

Flared rear guards (wider than usual)

Tomei Hicas Lock System

Twin Davis Craig Thermo Fans

Greddy Oil Catch Can

R32 GTR Wheels

Custom 3 Inch Exhaust w/High Flow Cat

ReSpray in Custom Gold

HKS Hypermax Suspension

Z32 AFM

Dr Drift Boost Controller

GTR Fuel Pump

R32 GTR Black Bonnet

2 HKS Guages - Water/Eng Temp

Pivot Full Auto Turbo timer

Pod Filter

Immobileser (Playing up)

Producing a SAFE 210RWKW @ Dr Drift

$17,000 ONO

Contact Troy...

[email protected] (Also for MSN)

0409875864

Car is Currently located 1hr from CBD

Will add more pics shortly

post-13769-1189059405_thumb.jpg

post-13769-1189059574_thumb.jpg

post-13769-1189059642_thumb.jpg

post-13769-1189061206_thumb.jpg

post-13769-1189061428_thumb.jpg

Edited by Prospector
Link to comment
https://www.sau.com.au/forums/topic/183952-trackstreet-r32-gts-t/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...