Jump to content
SAU Community

Recommended Posts

being the avid water conserver that i am i bought a bottle of the ol' spray on waterless wash and been using it and find its pretty alright stuff but i've heard it's real bad for the paint? anyone confirm this? cuz i don't wanna be harming my baby.

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/
Share on other sites

Might be but I havent heard anything confirming that. Normally I give it a once over at carlovers if it's really dirty and then use plenty of towels while im using the waterless wash. Main thing is not too have big particles of dirt on the car when your cleaning it.

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3333189
Share on other sites

I was a detailer for almost 3 years a while back and I would NEVER use a waterless wash on any car...

That said, it does depend on what colour car is too, if your car is Silver, White or Light grey you can get away with more because those colours dont show up scratches as much but black, blue, red or alot of other darker colours WILL scratch a lot easier using a waterless wash.

I say, go to car lovers RINSE your car with the sprayer (dont use the brush or the so called "hot wax") then drive the long way home to air dry it and use a nice soft chamois and polish cloth to finish it off. :nyaanyaa:

Edited by Bullet32
Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3333567
Share on other sites

I was a detailer for almost 3 years a while back and I would NEVER use a waterless wash on any car...

That said, it does depend on what colour car is too, if your car is Silver, White or Light grey you can get away with more because those colours dont show up scratches as much but black, blue, red or alot of other darker colours WILL scratch a lot easier using a waterless wash.

I say, go to car lovers RINSE your car with the sprayer (dont use the brush or the so called "hot wax") then drive the long way home to air dry it and use a nice soft chamois and polish cloth to finish it off. :P

why not the brush or the wax? whats the go?

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3334054
Share on other sites

The BRUSH NO!!!! the dude in the 4wd befor you doesnt care about leaving rocks etc. in it plus thery are made from some rough crap...

Just go wash your car at night and take your own sponge/chamios/cleaning equip... no cranky operator tellin you off then.

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3334072
Share on other sites

Dont use the brush because (as TeeJay1600 said) there is almost always foreign crap like stones, sand, tar or mud in the bristles which as much as you spray the brush will still be there when you wash with it.

Even though they say that the brush wont hurt your paint, I have seen the evidence and can say that it is just as bad as using an automated car wash.

The so called "Hot wax" is just hot water mixed with some sort of waxy slime that dries onto your car and leaves streaks that dont polish out, the only way to get them out is to have the car machine buffed, I had to do this to a mates Skyline after he used the hot wax and it took 3 hours to buff the streaks out.

If you love your car, rinse it with the pre-wash rinse and then the high pressure rinse and THATS IT!

Take a good chamois with you and chamois it (if there isnt still crap on the paint) and then when you get home give it a good polish or hit it with some Meguires cleaner clay to get rid of any tar spots or dead bug marks.

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3338392
Share on other sites

You could do what I do which is tedious but hey it works... *Note: Make sure you do this after operating hours or you will be asked to leave :D*

- Fill a Thermos with boiling water, take a bucket and some car washing liquid.

- Go to one of the car washes.

- Give the car a high pressure blast with the hose

- pour the washing liquid and boiling water into the bucket and use the hose to fill (usually the less powerful mode or it tends to blow your bucket halfway across the car wash (yes I have done this, it's funny to everyone except you hehe)).

- wash the car as you would normally (if there are others around I do it a lot quicker and usually have it done quicker than your regular Joe Blow)

- use the high pressure rinse again.

- Chamois.

Bobs your uncle you have a nice clean car that has not damaged the paint.

Link to comment
https://www.sau.com.au/forums/topic/184033-waterless-wash/#findComment-3338546
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...