Jump to content
SAU Community

2nd Chance Cruise/bbq To The Gold Coast


Recommended Posts

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

well I guess what i'll do in the meantime is run it around on 7psi until i get it tuned. i read in the faq on here that anything over 60 is bad. this morning it only got to 25 so maybe its still learning or something. but im not silly, and I havnt been fanging it around cos i know that aint a good idea.

btw

name-- Will

car-- S2 R33

number of people wanting fed-- 1

where your guna meet us-- hyperdome

name-- kev

car-- s13

number of people wanting fed-- 1

where your guna meet us-- hyperdome

Name: sim

Car: silver R32

Number of People wanting fed: ?

Meeting Point: hyperdome

not sure if ill be there yet depending how big saturday night is.....

might bring a few others if i do. will find out asap.

but does he knw which way to turn and how much..? i havent played with the ignition on RBs nor do i want to.. see many luxes and toyotas go bang bang with too much timing.. not at my hands actually at the hands of who ever put the damn LPG kit in.. pings like a rabbit on heat..

but im guessing talking to his tuner would be more beneficial..

you turn it to the left a few mm, Dan and I did mine on Sunday and it fixed things quite nicely, as a temporary measure it is gun.

Spooner you could also take the ign timing out in the power FC it has a function where you can take timing out of the whole map

you turn it to the left a few mm, Dan and I did mine on Sunday and it fixed things quite nicely, as a temporary measure it is gun.

Spooner you could also take the ign timing out in the power FC it has a function where you can take timing out of the whole map

left to retard.. i knw. but still its nothing something anyone should just play with..

yeh pfc has ingition function too.. forgot bout that.

left to retard.. i knw. but still its nothing something anyone should just play with..

yeh pfc has ingition function too.. forgot bout that.

if you are retarding it the worst you can do is make it slow

and over fuel it a bit, it wont cause knocking or pinging.....if you couold retard it enought then it would run over a bit more, but you can turn the CAS far enough to do that.

advancing it will...

Okay so we really wanna come on this but unfortunately the car is still suffering from it's break in (the towie f**ked up the suspension or some arms under there or sumsing and it now shudders when driving at higher than 60kph) therefore we need lifts. I think Andy is gonna go with dave but Joshwa and myself need a car to ride in. Markie, are you going to the Springwood meet and if so, can I tag along with you?

Cheers, Anna xo

you turn it to the left a few mm, Dan and I did mine on Sunday and it fixed things quite nicely, as a temporary measure it is gun.

Spooner you could also take the ign timing out in the power FC it has a function where you can take timing out of the whole map

left to retard.. i knw. but still its nothing something anyone should just play with..

yeh pfc has ingition function too.. forgot bout that.

yeh i took 3deg out of the whole map the other day, as i had read the manual and susses it out. seems to work well, but im still not gonna go too hard till i get some injectors and tune it

yeh i took 3deg out of the whole map the other day, as i had read the manual and susses it out. seems to work well, but im still not gonna go too hard till i get some injectors and tune it

Bunta here CBF signing out of Annas account

remember that setting is only tempory so you will need to set it after every time you turn the car of

Okay so we really wanna come on this but unfortunately the car is still suffering from it's break in (the towie f**ked up the suspension or some arms under there or sumsing and it now shudders when driving at higher than 60kph) therefore we need lifts. I think Andy is gonna go with dave but Joshwa and myself need a car to ride in. Markie, are you going to the Springwood meet and if so, can I tag along with you?

Cheers, Anna xo

thers a springwood meet...?? nah ill be meeting straight up at hyperdome at 2pm ill be ther. :P sure u can ride with me. ill kick my bro out into someone elses car.. bring some CD's i got alot of aqua gorillaz and michael jackson on a mp3 CD i made.. care for a singalong on CVs fallas..?

but yeh u can ride shot gun and play with the walkie.

thers a springwood meet...?? nah ill be meeting straight up at hyperdome at 2pm ill be ther. :P sure u can ride with me. ill kick my bro out into someone elses car.. bring some CD's i got alot of aqua gorillaz and michael jackson on a mp3 CD i made.. care for a singalong on CVs fallas..?

but yeh u can ride shot gun and play with the walkie.

Sorry mate I meant the hyperdome meet just didn't come out right hahaha

I'll see ya there :D

Anna xo

thot i mite have got my pay in before the weekend but it aint in yet so ill be piss poor by sunday so sumone better be bringing some food lol, remember i provided food and drink for the cootha bbq and rohans engine removal so please be kind :thumbsup: thanks lol

also i was having a brainstorm about the bbq and thot of a few ideas, what do we think about having it on the way, at hinze dam?

or are u all coming for the bbq only and dnt wana come up the mountain to the glow worms huh huh?

Bunta here CBF signing out of Annas account

remember that setting is only tempory so you will need to set it after every time you turn the car of

yeh it resets when ignition gets turned off. i only adjust it when i wanna run 10psi, have been taking it pretty easy while i wait for injectors and fuel pump. have any of you guys fitted a bosch 044 to a 33?

i'll be lookin a lil bit drift on sunday as my rear passenger side tyre blew out today, dodgy bloody nankang shit. will be good to have some decent tread up back.

Sorry mate I meant the hyperdome meet just didn't come out right hahaha

I'll see ya there :)

Anna xo

no probs.. well when u get ther we can decide :D

thot i mite have got my pay in before the weekend but it aint in yet so ill be piss poor by sunday so sumone better be bringing some food lol, remember i provided food and drink for the cootha bbq and rohans engine removal so please be kind :thumbsup: thanks lol

also i was having a brainstorm about the bbq and thot of a few ideas, what do we think about having it on the way, at hinze dam?

or are u all coming for the bbq only and dnt wana come up the mountain to the glow worms huh huh?

i dnt care.. up for anything.. prob be lazy and follow the crowd.

yeh it resets when ignition gets turned off. i only adjust it when i wanna run 10psi, have been taking it pretty easy while i wait for injectors and fuel pump. have any of you guys fitted a bosch 044 to a 33?

i'll be lookin a lil bit drift on sunday as my rear passenger side tyre blew out today, dodgy bloody nankang shit. will be good to have some decent tread up back.

nankangs are a good tyre imo better than firestone lol.. and sava..

dnt like the 044 pumps... get a 040 intank

no probs.. well when u get ther we can decide :thumbsup:

i dnt care.. up for anything.. prob be lazy and follow the crowd.

nankangs are a good tyre imo better than firestone lol.. and sava..

dnt like the 044 pumps... get a 040 intank

ey the bbq isnt at natural arch??

nankangs!!! for a cheap tyre they are ok...if you want something that grips then choose something else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...